How about this bl setup?

[RC Fan 4 Life]

wanderer 9xl
BK Electronics 12020 Warrior Controller
using 16 cells GP 3300

I would like to hit 50mph or high 40's and still have arm pulling off torque.

[nbcaznmaster]

only 16 cells? i'd go with 18 or 20.

[crazyjr]

I would say 18 is the limit with a 9XL. Coolhand_country has tried20 cells and said it would heat up to above comfortable levels.

[Serum]

yeah, that setup sounds like the one for you.

16 cells, and that speed is fair easy to achieve.

[RC Fan 4 Life]

Originally Posted by nbcaznmaster

only 16 cells? i'd go with 18 or 20.

because i have packs of 7 cells now and i'd only need to add one more cell to each of them plus i would still be able to use my MRC dual charger.

Do you think my maxx would hold up to the 9XL on 16 cells? So far i have added...

UE 6 diffs
MIP CVDs all around
Single speed trans with steel ideler gear + FLM half case.
Hi Tech ultra torque steering servo
RR slipper clutch

it should last but i would recommend upgrading to the strobe slipper

[RC Fan 4 Life]

Any other suggestions guys? Before i buy. :)

Am i going with the right motor?

[coolhandcountry]

The mip may hold. I have seen them break. I like the ue much better. But that can come later. That motor is good. I like it. It gives me good run time and great power. especially on 16 cells. 18 51 gearing on the strobe works well. !6 51 give you a little longer run time.

[RC Fan 4 Life]

Originally Posted by coolhandcountry

The mip may hold. I have seen them break. I like the ue much better. But that can come later. That motor is good. I like it. It gives me good run time and great power. especially on 16 cells. 18 51 gearing on the strobe works well. !6 51 give you a little longer run time.

coolhandcountry... are you using this setup? Got any pics of it and how fast do you think it will go and hows the torque?

[coolhandcountry]

I run a 9xl with a 9920 right now. I have ran it from 12 to 20 cells. 20 seems a bit much. get a little warm. I have some video on the net to. www.rcpics.net/members/coohandcountry
this should have a video. Look up in the forum under extra long gmaxx I think itis.

[Nick]

I've bent MIP CVDs on a 7XL with 14 cells. Depends how you use your truck though, I was been abit crazy.

[RC Fan 4 Life]

Originally Posted by coolhandcountry

I run a 9xl with a 9920 right now. I have ran it from 12 to 20 cells. 20 seems a bit much. get a little warm. I have some video on the net to. www.rcpics.net/members/coohandcountry
this should have a video. Look up in the forum under extra long gmaxx I think itis.

That link comes up as ...Your search did not have any results.

[RC Fan 4 Life]

Originally Posted by Nick

I've bent MIP CVDs on a 7XL with 14 cells. Depends how you use your truck though, I was been abit crazy.

Got a link to the UE's that fit the stock maxx? I found 2 pins missing on the MIP's

[coolhandcountry]

http://www.rcpics.net/media.php?sear...earch&limit=10

This should work then.

Originally Posted by RC Fan 4 Life

Got a link to the UE's that fit the stock maxx? I found 2 pins missing on the MIP's

here is 6mm cvds for the widemaxx http://www.rc-monster.com/proddetail...13501s7&cat=47