Wanted: Brushless Motor for a 4s - revo setup

[Gee]

Thought I would check for any deals. It will be put in a e-revo running a mm/bec on 4s. It's not going in one of mine so I am open to anything that would work.

He lives close though so it needs to be able to keep him happy for a little while.

I might let go of one of my motors to him if any one has a decent motor that would be good for a 6s in a heavier Savage XL or LST2.

So
4s motor for revo size rc
or
6s motor for savage xl size rc

Thanks

[lincpimp]

Hey Guy,

I had a look and found 2 possible candidates...

Both are 1512 sized motors, a 1600kv medusa 60mm v2, and an aveox 36/30/1.5 2000kv. Either would be ok for a revo with lighter tires (no 40 series!) and the aveox would be better for 4s, the medusa would be better suited for 5-6s.

Not sure if that fits the bill, I do not have anything go for the lst on 6s (well I do but it is going in my lst!)

Let me know if you have any interest... And if any one else is interested let me know, I will give Gee first refusal since he started the thread!

[E-Revonut]

I have a Tekno edition Neu 1515 2.5D that would be great on 6s. Not sure if it's adequate for a Savage XL. 1 of the 4 mounting holes is stripped other than that it's excellent and would let it go for a decent price