 |
|
|
|
|
|
 |
 |
Weird MMM issue... |
 |
|
 |
|
(#1)
|
|
silly nitros....
Offline
Posts: 65
Join Date: Oct 2009
Location: Stillwater, MN
|
Weird MMM issue... -
03.23.2010, 05:50 PM
I have had my MMM for over a year now and it has worked flawlessly in my E-revo. This winter my new project was a Hyper9e, so today I plug in my battery ESC and Motor and when I give it throttle it revs up and kinda floats back down. And sometimes it just randomly goes into reverse . And now it does the triple beep and then flashes red infinity. The BEC wire is slightly damaged but the wire is fully intact and not touching anything. I've tried two motors, two receivers, recalibrating and completely different radios. I hope this is not a noob thread but I am stumped. I made a movie to demonstrate. Its just taking forever to upload so i'l put it in the next post.
|
 |
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
03.23.2010, 06:01 PM
Try a firmware update?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
silly nitros....
Offline
Posts: 65
Join Date: Oct 2009
Location: Stillwater, MN
|
03.23.2010, 06:07 PM
http://s629.photobucket.com/albums/u...nt=HYper9e.flv Link to the video
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Dual Brushless
Offline
Posts: 4,236
Join Date: Dec 2007
Location: Cape Cod, Mass.
|
03.23.2010, 06:56 PM
Those are some strange noises. As mentioned above, try a firmware update just for kicks. Try fixing that broken wire and then see what happens....you may want to forward clip to pdlecast..who is owner of castle so he can hear prob.
2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
silly nitros....
Offline
Posts: 65
Join Date: Oct 2009
Location: Stillwater, MN
|
03.23.2010, 06:56 PM
Well the new firmware fixed the red blinking light but not the "floating" motor problem. I must be a ESC or Spektrum transmitter problem. Could anyone from castle chime in??Thanks
EDIT: spoke too late... |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ
Offline
Posts: 396
Join Date: Apr 2008
|
03.23.2010, 07:13 PM
Throttle trim/sub-trim perhaps?
|
|
|
|
|
|
|
|
Just watched the video... |
|
|
|
|
|
(#7)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
Just watched the video... -
03.23.2010, 07:23 PM
There is a cat stuck in your motor. Problem solved!
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
|
silly nitros....
Offline
Posts: 65
Join Date: Oct 2009
Location: Stillwater, MN
|
03.23.2010, 07:25 PM
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ
Offline
Posts: 396
Join Date: Apr 2008
|
03.23.2010, 07:29 PM
I also added sub-trim to my suggestion but looks like those seem to be in order. Maybe apply some WD-40 to the throttle trigger hinge?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
silly nitros....
Offline
Posts: 65
Join Date: Oct 2009
Location: Stillwater, MN
|
03.23.2010, 07:50 PM
Figured it out, my Trx radio and my 1 year old spektrum DX3s are both bad. Tried another of my trx radios and worked flawlessly. Anybody know where i should start to try and get a replacement radio?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
03.23.2010, 07:52 PM
Is the radio that works the same one that was used with the E-revo?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
RC-Monster Dual Brushless
Offline
Posts: 4,236
Join Date: Dec 2007
Location: Cape Cod, Mass.
|
03.23.2010, 07:53 PM
Weird how the Spektrum radio went bad.
2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S |
|
|
|
|
|
|
|
|
|
|
|
|
(#13)
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
03.23.2010, 08:55 PM
The throttle pot could be just dirty or worn...
I really wish radios would come with encoded controls instead of crappy pots... |
  |
|
|
|
|
|
|
|
|
|
|
(#14)
|
|
silly nitros....
Offline
Posts: 65
Join Date: Oct 2009
Location: Stillwater, MN
|
03.23.2010, 09:55 PM
Yeah, it transmits just fine, it just is overly sensitive.....like super sensitve (wind blows hits throttle...jolt). What's the easiest way to go about opening this thing up? Do you guys have any recommendations on how to clean it? WD-40......
|
|
|
|
|
|
|
|
|
|
|
|
|
(#15)
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
03.23.2010, 10:01 PM
Cleaning it will only work if the pot is in fact dirty, and if it's not sealed. Use contact cleaner which you should be able to get at RadioShack. As far as opening it goes, just undo all the screws and go slow. But really, I would see about sending it back for warranty work if possible.
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
