Brushless Revo Help - RC-Monster Forums

Thunderbruiser · **Brushless Revo Help -** 05.22.2006, 02:04 AM

Well guys i saw my friend running his revo which happens to be gas and he just bought the other day and i've decided i want one but i want it bl...so i am looking to sell of my reedy combo+all alu rustler for a roller or actually just buying the roller from here:

my list of goodies:
Roller Offered from here
dual 3s 8000mah lipo's since it's what i have right now
NOT sure of motor/esc combo...but obviously needs to be hi amp
single speed conversion and optimized motor mount

what would be a good setup for 6s lipo power basically dual 3000's in a series

squeeforever · 05.22.2006, 09:16 AM

I think a 10XL with a 9920 would be a great choice.

Sylvester · 05.22.2006, 10:24 AM

A 10XL on a Quark 125B would be awesome too!

coolhandcountry · 05.22.2006, 01:24 PM

9xl or 10xl would be nice. If you going revo I am not sure if the diffs are going to take the power of a xl motor on 6s lipo. Esc the mgm quark or 9920 will work for the money I think the quark may be the stuff.

Thunderbruiser · 05.23.2006, 11:06 PM

what gearing should i go for? i'll prolly run stock tires cause they have good performance on and off the road

squeeforever · 05.23.2006, 11:22 PM

16 or 18/51.

Thunderbruiser · 05.23.2006, 11:30 PM

here's my list for this truck:
quark 125b
wanderer 9xl
strobbe slipper kit
ofna 51 tooth plastic spur
e-maxx tranny brand new
aluminum idler set

Needs:
GorillaMaxx Chassis
Radio
tires
shocks
body

squeeforever · 05.23.2006, 11:53 PM

I would go for some GTR shocks, the carbon fiber G2R chassis and some Crimes on Walbash rims with Daces adapters.

Thunderbruiser · 05.24.2006, 09:11 PM

yeah i went for gtr shocks lol and lost!

Thunderbruiser · 05.30.2006, 08:49 PM

got roller in so now it's just chassis that i need and bl setup...I have the transmission as well which will get the 1 spd conversion on it!

05.30.2006, 10:33 PM

Please report back on motor temps when you get that machine running.
I am curious how hot the 9xl will get on 6s.
I want to try a 9XL on 5s.

Thunderbruiser · 05.30.2006, 10:59 PM

alright

coolhandcountry · 05.31.2006, 07:40 AM

Quote:

Originally Posted by fishmasterdan

Please report back on motor temps when you get that machine running.
I am curious how hot the 9xl will get on 6s.
I want to try a 9XL on 5s.

I ran a 9xl on 20 cells. It got warm but you could touch it for a few seconds. If it would have got hotter I would have put a temp gun on it. It won't real warm out side when ran it. So on a hot day the 9xl may over heat on 20. I didn't have problem with 18 cells. Usually run in the 130 to 140 f range. Unless really running the crap out of it.

Thunderbruiser · 05.31.2006, 02:20 PM

well i wont be running the hell outta it...so i should be ok

Thunderbruiser · 06.05.2006, 09:22 PM

parts came in build up pics soon@!