problem with parts RRP

hello has all
I does not know if it is the place for poster that but good I am French and I have one can of evil English :010:

I comes to present my concern to you on one limps of Tmaxx 3.3 with pinions RRP
I broke the pinion of 2nd gear

as well as the pawl and a bearing

and I machined the pinion 2nd input gear


I mailé on several occasions RRP without answers and more answers of the salesman at which I bought them, somebody would have it already seen that???
I use a raport std and a LRPZ28R spec3 on a supermaxx
thank you very much

gilou327
http://www.unlimitedengineering.com/...ages.php?c=381
http://www.maximummt.com/phpbb/viewt...29346&start=20
http://www.maximummt.com/phpbb/viewt...&highlight=rrp

[supralover72]

Seems like bad mesh. (The too gears did not have the correct distance between them).

can be

but the concern it is that for 2 weeks, I have not still had answers of RRP
then I post one can to see everywhere whether other people had the same concern
and aparement their new parts have was reinforced

thank you



peut etre

mais le souci il est que cela fait 2 semaines, je n'ai toujours pas eu de réponses de RRP
alors je poste un peut partout pour voir si d'autres personnes ont eu le même souci
et aparement leurs nouvelles pieces ont était renforcé
merci ;)

[supralover72]

Oh, sorry. Have you tried contacting them by phone? Have you tried their forum if they have one?

I am French and I do not speak English or a minimum with a translator it is plustot difficult to call them :012: :012: :012:

and unfortunately they do not have a forum :012: :012:

thus I hope to find tracks has to follow :dft009: :dft009:
thank ;)

[silentbob343]

Originally Posted by gilou327

hello has all
I does not know if it is the place for poster that but good I am French and I have one can of evil English :010:

I comes to present my concern to you on one limps of Tmaxx 3.3 with pinions RRP
I broke the pinion of 2nd gear
[IMG]http://www.unlimitedengineering.com/gallery/files/4/5/7/0/IMAGE_00132.jpg[/IG]
as well as the pawl and a bearing
[IMG]http://www.unlimitedengineering.com/gallery/files/4/5/7/0/IMAGE_00129_138012.jpg[/IG]
and I machined the pinion 2nd input gear
[IMG]http://www.unlimitedengineering.com/gallery/files/4/5/7/0/ataque.JPG[/IG]

I mailé on several occasions RRP without answers and more answers of the salesman at which I bought them, somebody would have it already seen that???
I use a raport std and a LRPZ28R spec3 on a supermaxx
thank you very much

gilou327
http://www.unlimitedengineering.com/...ages.php?c=381
http://www.maximummt.com/phpbb/viewt...29346&start=20
http://www.maximummt.com/phpbb/viewt...&highlight=rrp

In to the history books, "one can of evil english". Almost as good as; "grap on my tired".

afflicted but I does not understand
je vais voir avec un amis québéquois qui parle francais et anglais pour m'aider a parler avec vous :)
thank you ;)

[mini-mad]

yes,you have an evil english,i've not understand the whole thing:018:
t acompris ou faut que je te le repete?:018:

[mini-mad]

ok,i'me friend of gilou and he has asked me to correct his post,

he has a probleme with his full rrp maxx tranny,as you can see in the pics,one gear is broken : the gear of the second gspeed,in the second pic,you can see the pieces of the broken gear.
in the 2 last pices,you can see the 2nde speed input gear who is abnormally worn.

he has tried to contact rrp but they don't answer to his mails,he has contacted teknorc(the shop where he has bought them) and they don't answer too:035:
he is running on a supermaxx and his motor is an lrp z28r spec 3:o
he want to know if someone have already seen something like this,but we though that's a manufacture defect:002:
thanks for your answers:027:

rrp has not been easy for me to contact either. they must not want our money.

[Robert]

This thread is almost a year old. Bring out your dead!