 |
|
|
|
|
|
 |
|
|
 |
Kyosho spur for the Losi diff |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 185
Join Date: Dec 2007
Location: Miami, FL
|
Kyosho spur for the Losi diff -
08.18.2008, 08:19 PM
Hey guys. I just picked up my next speed project, a Losi 8ight T. I need to know what do I need to mount a Kyosho plastic spur gear on the diff? Any help is appreciated!!
|
|
|
|
 |
 |
 |
|
diff |
|
|
|
|
|
(#2)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 214
Join Date: Dec 2007
Location: Ontario, Canada
|
diff -
08.18.2008, 09:00 PM
The Kyosho gear will bolt right onto the diff no problem. I did run into an issue with clearance to the RCM mount, the Kyosho gear is more offset and it binds on the mount. I probably could make it work but I had a different conversion mount that works fine.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Brushless
Offline
Posts: 2,824
Join Date: Apr 2005
Location: largo fl
|
08.18.2008, 09:09 PM
Mike said his LOSI motor mount was not made to work with the kyosho plastic spur.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
|
RC-Monster Carbon Fiber
Offline
Posts: 185
Join Date: Dec 2007
Location: Miami, FL
|
08.18.2008, 09:13 PM
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
|
RC-Monster Brushless
Offline
Posts: 2,824
Join Date: Apr 2005
Location: largo fl
|
08.18.2008, 09:20 PM
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
|
RC-Monster Carbon Fiber
Offline
Posts: 185
Join Date: Dec 2007
Location: Miami, FL
|
08.18.2008, 09:31 PM
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
"Out of spec" enthusiast
Offline
Posts: 820
Join Date: May 2005
|
08.18.2008, 10:37 PM
No mods to the RCM mount necessary. Here is what you have to do: Find a thin 8mm washer that fits on the front side of the center diff rear bearing and you are set. The main problem that I encountered with the kyosho spur was oil leakage. The slot where the o-ring sits is a little wider, which may to blame.
Sub 7lb, lowest CG of any 1/8 buggy http://www.rc-monster.com/forum/show...894#post367894 Area 52 Ranch Raceway T.R.C.R. |
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 185
Join Date: Dec 2007
Location: Miami, FL
|
08.19.2008, 11:57 PM
Thanks for the info!!
|
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Carbon FIBRE NOT FIBER!
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
|
08.20.2008, 06:50 AM
my hyper diff also leaks slowly.
o well. a small price to pay for that extra surface area and quiet should be less hard on the pinion too. hope you get it working Monster Max Still Working... JR SX3 Neu 1512 2D/S 12t pinion 4800 zippy-r XRAY xt8 MMM Neu 1512 3D/F 11t pinion 6s 5000 Flightmax/ 4s 4000 Turningy |
 |
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
