Need Wider Stance - Input?

[Skelbow]

I'm running Savage Stub Axles on my Twin Force as well as 40 Series Tires.

To make the story short, the 40 series rims I was using (19mm Hex Thunder Quake) will no longer work, and I need to find something else.

Now an OFFSET Pro-Line 40 Series rim still needs at least 5/8" more offset to work for my setup.

So my question is, does anyone know where I can get wheel widener for a Savage? Or know of any 40 Series Rim that has a massive offset?

Thanks.

[crazyjr]

the only ones i know about are RPM wide maxx wheels and they are only maxx sized

[Serum]

There are some special hexes available to make the savages wider, but they are a huge stress on your drivetrain. (i think i've seen them on ebay, and a german guy makes them too i thought..)

[Nick]

The 23mm 40 series add about 1cm each side. I have Velocitys and the difference is noticable.

I have some NIP RDLogic hexes that make the truck wider by about 1.5" total. If you are interested in them I'll sell them cheap.

[RC-Monster Mike]

Not sure if this will work, but here is a possible solution:
Maxximizer makes a maxx to 1/8 buggy wheel adapter(which I happen to have). Perhaps these, inconjunction with some dominator wheels(plenty of offset!) would give you the width you need. A picture of your setup may help determine if it will work, but it just may be the answer you were looking for.