EZ Run ESC for Revo Conversion

http://www.swanghobby.com/product.ph...&cat=41&page=1

Would that handle a 8XL on 12 Ni-Mh cells and later on a 4S Li-Po? I saw a video on YouTube and that's what gave me the idea. I want to spend as little $$$ as possible to get a Revo that can do at least 40mph, 35mph minimum.

Nicholas

[q8-maxx]

No its very small ESC for 12cell or 4s lipo. and its rated for 60A. this motors need more amp like 80-120A

[Takedown]

I wouldnt suggest it but it has been done. I would atleast reccomend a MM if your on a budget.

[hailmick]

+1 for mamba max

I think this would be the EZRUN for you http://cgi.ebay.com/EZRUN-Brushless-...1%7C240%3A1318 It's pretty new,untested,but cheaper and doesn't need bec or fan.Here it is with a xl motor http://cgi.ebay.com/EZRUN-19T-3674SL...1%7C240%3A1318 I don't think you can get cheaper then 175 shipped for a system.But you'll have a cheap system :(

[RC-Monster Mike]

RC-Monster will be selling the HobbyWing 1/8 controllers very soon(need to beat them up first).

[q8-maxx]

Originally Posted by RC-Monster Mike

RC-Monster will be selling the HobbyWing 1/8 controllers very soon(need to beat them up first).

Thanks for good news.

(need to beat them up first)did you means test them if they are good or not before starting selling them?

[pedeboi364]

and the 1/10 ones too? pls??

[RC-Monster Mike]

Yes - I need to get some time to learn their strengths and weaknesses(beat them up). If they hold up well on 4s, then I will stock and sell them(at an attractive price). At 80 amps, I suspect the 4s model will be mid range buggy territory. The 150 amp unit should in theory handle whatever it needs to in a buggy or truggy. I won't know until I get some time on them.
I am not sure on the 1/10 escs. If the 1/8 stuff works out well, then there is no reason not to offer the 1/10 stuff as well I suppose. :)

Originally Posted by RC-Monster Mike

Yes - I need to get some time to learn their strengths and weaknesses(beat them up). If they hold up well on 4s, then I will stock and sell them(at an attractive price). At 80 amps, I suspect the 4s model will be mid range buggy territory. The 150 amp unit should in theory handle whatever it needs to in a buggy or truggy. I won't know until I get some time on them.
I am not sure on the 1/10 escs. If the 1/8 stuff works out well, then there is no reason not to offer the 1/10 stuff as well I suppose. :)

Any update to how this EZRUN controller is doing with the bash tests?

[Raze ST Truggy]

I'm going to guess that it passed the testing since he is now offering them in his store:

http://www.rc-monster.com/proddetail...rod=HW80ampesc

Mine should be on the way. I'll report back once I've gotten a few packs through it. I'll be running a Raze Buggy with a 60mm 2000kv medusa.

-Brian

[pedeboi364]

^^^thats awesome to hear. I have a T-maxx, pede, and DST all screaming for some good BL, but whenever I check out the prices my wallet starts to cry. Do u know when u'll be offering these ESCs, and at what prices?? thnx!!!

[q8-maxx]

Thats why we said You are the best :)
Thank you alot for your supports

Also can you see if they are waterproof. I've seen some sites advertising them as "Waterproof" but I'm not going to try myself.

Nicholas

[pedeboi364]

ive only seen dustproof and have yet to see a real waterproof bl esc