 |
|
|
|
|
|
 |
|
|
 |
Minimum Battery Specs? |
 |
|
 |
|
(#1)
|
|
RC-Monster Aluminum
Offline
Posts: 704
Join Date: May 2008
|
Minimum Battery Specs? -
01.28.2009, 03:15 AM
What is the Minimum Battery spec I need for a 4s Brushless conversion using a Medusa 2200 60mm can battery?
At the moment I have Reedy 5000's 20C which seem fine, but I can get some 4600's 20C, or is that too low? What should I be chasing? |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Dual Brushless
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
|
01.28.2009, 03:22 AM
Really need the whole setup to really know, but so long as you got at least 90 amp continous you should be good. I have run 3700 mah 20c LIPO's on my MT with no problems, I have a G2R with neu 1515/2.5d w/quark 125, It has been run on 4,5 and 6s setups with those batteries
People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
"1.21 GIGAWATTS!!!"
Offline
Posts: 523
Join Date: Nov 2007
Location: Sacramento
|
01.28.2009, 03:36 AM
i used to run my 8ight on a v2 2200-60mm medusa on 4s 5000 zippy's rated 20-30C and neuenergy lipos 4s 5000mah rated at 20C....the same motor and setup worked fine in my e-maxx as well...
MMP/1410 3800kv 2s 65C 5600mah proteks Dx3s |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
