Do you have this in your tool box?

[brushlessboy16]

This thread is something to keep the clutter out of the PIF thread. small things that you might need for your vehicle-that people would otherwise throw out. can be asked for here. dont ask for a Neu or a MMM- anything like that. just odds and ends... please keep chatter to a dull roar.

Wanted- 1/10th st shocks, standard or 550 brushed motors.

[lincpimp]

Originally Posted by brushlessboy16

This thread is something to keep the clutter out of the PIF thread. small things that you might need for your vehicle-that people would otherwise throw out. can be asked for here. dont ask for a Neu or a MMM- anything like that. just odds and ends... please keep chatter to a dull roar.

Wanted- 1/10th st shocks, standard or 550 brushed motors.

10th scale shocks - for what?

[E-Revonut]

OK, I guess I can follow. instead of posting what you have to offer this is posting up what you need! I'm willing to help anyone I can.

I could use a single motor plate and gear cover for an E-REVO, sway bar for REVO, and a girlfriend!

[lincpimp]

Originally Posted by E-Revonut

OK, I guess I can follow. instead of posting what you have to offer this is posting up what you need! I'm willing to help anyone I can.

I could use a single motor plate and gear cover for an E-REVO, sway bar for REVO, and a girlfriend!

Be careful what you ask for. Harold might make a road trip after he reads that...

[BL_RV0]

I could use alum servo arms (1 sided), a gear for a HS-5645MG servo (the one with the spline shaft on it that the arm attaches to), and a black wing that will fit on a hyper st.

[brushlessboy16]

Originally Posted by lincpimp

Be careful what you ask for. Harold might make a road trip after he reads that...

going on an evader st

Originally Posted by BL_RV0

I could use alum servo arms (1 sided), a gear for a HS-5645MG servo (the one with the spline shaft on it that the arm attaches to), and a black wing that will fit on a hyper st.

i have an arm from a ds1015.. should work and its got the aluminum collar and all on it.. its shiny... Lmk

[BL_RV0]

Originally Posted by brushlessboy16

i have an arm from a ds1015.. should work and its got the aluminum collar and all on it.. its shiny... Lmk

I'll take it, do you still have my address?

[_paralyzed_]

Originally Posted by lincpimp

Be careful what you ask for. Harold might make a road trip after he reads that...

you don't know how good it FEELS till you've taken the ride, DO IT ON WHEELS!

[rawfuls]

Read your AIM Ben.

[brushlessboy16]

Anyone Have Maxx Bulkheads?

[Krawlin]

Originally Posted by brushlessboy16

Anyone Have Maxx Bulkheads?

I gave my aluminum GH ones to Ian and haven't seen or heard of them in a weeks.......

And I need 2 rear CVD's (diff to wheels) for a 2.5 style Maxx (can't use anything meant for 3.3 knuckles) so if anyone has some spares laying around I would be glad to take them off your hands, they would be going to a great new home...

[E-Revonut]

Anybody have a traxxas 2075 servo?

[BL_RV0]

Originally Posted by brushlessboy16

Anyone Have Maxx Bulkheads?

I have grey ones, front and rear.

Originally Posted by E-Revonut

Anybody have a traxxas 2075 servo?

I have a 2070 servo. It's the 2075 except not waterproof.

[rawfuls]

I too have some bulk heads.

[maxair45]

I can help you out bl boy with some 1/10 stadium truck shocks(shoot me a PM if you need them). I could use some xxx-t rims if anyone could help me out.