Some bash pictures - RC-Monster Forums

Jeremy1976 · **Some bash pictures -** 04.02.2009, 05:49 PM

I am loving this truck the more I drive it! The pictures were taken at 1/4 throttle due to me taking the pictures myself.

Jeremy1976 · 04.02.2009, 05:50 PM

And my favorite. Too bad it was not focused more....

_paralyzed_ · 04.02.2009, 05:59 PM

Nice pics. Looks like you had fun.

04.02.2009, 06:03 PM

Good pics....You running 3S??? I have a stampede (XL5) with the VXL system in it......those are good systems and can be found rather cheap.

Jeremy1976 · 04.02.2009, 06:07 PM

Quote:

Originally Posted by _paralyzed_

Nice pics. Looks like you had fun.

Thank you.

Quote:

Originally Posted by ambryatim

Good pics....You running 3S??? I have a stampede (XL5) with the VXL system in it......those are good systems and can be found rather cheap.

Yes 3s. Running a Medusa 36-50-3300 and a MMM in it.

04.02.2009, 11:16 PM

Quote:

Originally Posted by Jeremy1976

Thank you.

Yes 3s. Running a Medusa 36-50-3300 and a MMM in it.

Sorry Just assumed that it had the VXL...Looks like it has some great power though.

RUSTY XL-5 · 04.02.2009, 11:26 PM

Jeremy, how do you like the 3300 on 3s? I have the 4800 on 3s and its just bonkers! Sooooooooo much better than the mm 5700.

Where are you? Maybe by a stroke of luck your somewhere near me.....

Jeremy1976 · 04.03.2009, 12:02 AM

Quote:

Originally Posted by RUSTY XL-5

Jeremy, how do you like the 3300 on 3s? I have the 4800 on 3s and its just bonkers! Sooooooooo much better than the mm 5700.

Where are you? Maybe by a stroke of luck your somewhere near me.....

I am in Wisconsin, about a hour north of Milwaukee. I love it on 3s. Today the motor felt kind of warm. I could keep my finger on it for about 5 seconds maybe a tad longer. Stupid me forgot my temp gun. However the MMM and lipo were real cool. On 2s everything stays super cool. I can pull wheelies at any speed with it. I am using 0.8 pitch gearing and running 19/56 right now.

04.02.2009, 06:23 PM

Nice pics! i had so much fun with my Rustler. Simple, worked well, and ran quite strong. i am actually trying to get my old one back.

Happy bashing.

magman · 04.02.2009, 06:27 PM

Nice pics...an infield is always a great place to run.

Metallover · 04.04.2009, 11:30 PM

You tore up a perfectly raked baseball field!!

Oh wait, it's a wussy 10 year old softball field.

04.05.2009, 02:18 AM

Look at the bright side, at least it was a baseball field.

sikeston34m · 04.05.2009, 10:20 AM

I LOVE this setup.

How long have you been driving it and how is it holding up? Stock VXL drivetrain?

I have an older Rustler that is going to be updated soon.

VXL transmission and cvd's will be part of the upgrade process.

I was thinking about maybe the Medusa 36-50-2200kv Motor powered by a Mamba Max on 4S 3200mah Flightpower Lipo. Then use Mod 1 gearing. Then maybe gear to the moon if I wanted. LOL

04.05.2009, 12:35 PM

Quote:

Originally Posted by sikeston34m

I was thinking about maybe the Medusa 36-50-2200kv Motor powered by a Mamba Max on 4S 3200mah Flightpower Lipo. Then use Mod 1 gearing. Then maybe gear to the moon if I wanted. LOL

Why not just go for the 60mm if you are going for a 2200kv 4s setup?

sikeston34m · 04.05.2009, 01:30 PM

Quote:

Originally Posted by E-sav

Why not just go for the 60mm if you are going for a 2200kv 4s setup?

I am using a 36-60-2000kv in my E Revo. It's one heck of a motor.

You have a good point there.

I have a 36-60-1500kv on hand. Hmmm.......can this be geared for 4S operation on the Mod 1 gears?

Time to consult the speed calculator.