 |
|
|
|
|
|
 |
|
|
 |
Crt.5 steering servo |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 350
Join Date: Jun 2008
Location: Quebec,Canada
|
Crt.5 steering servo -
07.07.2009, 09:26 PM
if im using a low/standard torque steering servo like around 40 oz-in of torque at 6.0 volts on my crt.5 on 3s lipo do you think it can overheat the esc/internal bec on the mamba max esc?
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster RC8T
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
|
07.07.2009, 09:51 PM
Running anything extra of the internal bec when running above 2s is gonna stress it and heat it up
SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
07.07.2009, 10:06 PM
Yep. I ran a test a long time ago and found that even a low 0.25A load on the internal BEC (on 8 cells IIRC) caused it to heat up fast. Rule of thumb: use a switching BEC with ANYTHING over 2s or 7 NiMH cells.
|
  |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
07.07.2009, 10:24 PM
MM bec is 5v!
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
