Xushobby ubec

[Jasper]

Hello people,

I ordered the ubec from xushobby. And today I received the package. Very fast shipping to Holland! 11 days I believe. But however. I am wondering how I must connect the ubec? I suppose that the black jumper is going into the receiver, but where must I put that red jumper in?

Thank you,

Greetz Jasper

[maxxdude1234]

The red jumper is what goes into your batteries. I'm guessing you'll need to cut the jumper off, so that the red and black wires are separate. Then solder the wires onto you ESC wires (from batts to controller). Maybe someone with one of those could confirm.

[Serum]

red one goes to the batteries and the black plug goes to the receiver.

With the jumper on it delivers 6V with the jumper of 5V.