Question for Tekin

[FG101C]

I'm going to be picking up an HPI Blitz when it is released. The truck comes with a 15 turn brushed motor. Thats fine for 2s, I will be using 3s because that's what I have. My question is which one of your 1/10th brushless motors is the equivalent of 2700kv, or close to 2700kv?

Thank you.

[whitrzac]

Originally Posted by FG101C

I'm going to be picking up an HPI Blitz when it is released. The truck comes with a 15 turn brushed motor. Thats fine for 2s, I will be using 3s because that's what I have. My question is which one of your 1/10th brushless motors is the equivalent of 2700kv, or close to 2700kv?

Thank you.

http://teamtekin.com/blmotors.html#redline

Redline 290 9,000 kV
Redline 278 7,800 kV
Redline 268 6,800 kV
Redline 362 6,200 kV
Redline 358 5,800 kV
Redline 448 4,800 kV
Redline 537 3,700 kV
Redline 632 3,200 kV

[FG101C]

Ok thanks, now what about the ones that are listed as 21.5T, etc.

[whitrzac]

Originally Posted by FG101C

Ok thanks, now what about the ones that are listed as 21.5T, etc.

same as every other 21.5 motor...

http://www.teamnovak.com/products/br...spec_chart.htm

[brushlessboy16]

Originally Posted by FG101C

I'm going to be picking up an HPI Blitz when it is released. The truck comes with a 15 turn brushed motor. Thats fine for 2s, I will be using 3s because that's what I have. My question is which one of your 1/10th brushless motors is the equivalent of 2700kv, or close to 2700kv?

Thank you.

Go all they way, ( i know its not tekin) But i run the CC 2650 setup in my slash on 4s..

The tekin system would perform just as well.. man its fun

[FG101C]

Originally Posted by brushlessboy16

Go all they way, ( i know its not tekin) But i run the CC 2650 setup in my slash on 4s..

The tekin system would perform just as well.. man its fun

Holy crap man, I could barely keep the wheels from spinning with my stock slash on 2s. I have a 1509 3300kv Tekno Neu. Guess I'll wait until I get the truck and see if it fits.

[SpEEdyBL]

I have the tekin redline 632 and it runs brilliantly on 3s. A 13.5 on 3s will be less powerful, but more toward what you are looking for, still much more powerful than the 15 turn brushed motor.

[FG101C]

I was really wanting to keep it close to the stock speed, just a little quicker, nothing crazy.

then don't run 3s!

[SpEEdyBL]

No, you can run 3s. A 17.5 will do the trick. It' will be like a 10.5 on 2s, which should be very similar to the 15 turn brushed.

[FG101C]

Ok, thanks Speedy.