 |
|
|
|
|
|
 |
|
|
 |
What happened to my MM? |
 |
|
 |
|
(#1)
|
|
RC-Monster Aluminum
Offline
Posts: 832
Join Date: Jan 2009
|
What happened to my MM? -
11.23.2009, 06:51 AM
i was fixing my Mamba max to my 1/8 ep buggy. fixed a bec for it. Started & worked. But when i connected to my laptop it tried to update the software but I cancel it when it took too long.
After that the esc just cant work any more, servo & rx worked but no light or sound on the MM. I moved the switch thought it maybe loose but still nothing. There was a dim red light on the esc when I switch on. But still cant work. Is it a corrupted software in the esc? The laptop can still detect the esc but cant update or set it default. any idea what went wrong or its damaged & need to send for repair? Any master reset I can do manually on the esc? Thx guys! Hobbywing ManiaRc Acorn racing UpgradeRc Blackbeard RC Team Hong Nor Team RC Monster MoosRacing BocaBearings SweepRacing Tresrey USA |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 76
Join Date: Feb 2008
|
11.23.2009, 10:58 AM
Try to see if you can update the firmware.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
Old Skool
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
|
11.23.2009, 06:14 PM
How did you connect the esc to the laptop- via a castle link or with the usb cable?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Aluminum
Offline
Posts: 832
Join Date: Jan 2009
|
11.23.2009, 07:16 PM
Tried with updated software & old software. Tried both USB & castlelink. All can't work.
Old software can detect but can no longer update or set the esc to default. What went wrong? Hobbywing ManiaRc Acorn racing UpgradeRc Blackbeard RC Team Hong Nor Team RC Monster MoosRacing BocaBearings SweepRacing Tresrey USA |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
Old Skool
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
|
11.23.2009, 07:54 PM
Meh, sounds like its done for..
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
11.23.2009, 08:46 PM
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
RC-Monster Aluminum
Offline
Posts: 832
Join Date: Jan 2009
|
11.23.2009, 08:53 PM
I dun think it's the switch since even the computer can't update it. Do we did to switch on to update via USB?
Hobbywing ManiaRc Acorn racing UpgradeRc Blackbeard RC Team Hong Nor Team RC Monster MoosRacing BocaBearings SweepRacing Tresrey USA |
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Aluminum
Offline
Posts: 832
Join Date: Jan 2009
|
11.23.2009, 08:54 PM
How do I trade in for a mm pro? I don't see any forms in castle website
Hobbywing ManiaRc Acorn racing UpgradeRc Blackbeard RC Team Hong Nor Team RC Monster MoosRacing BocaBearings SweepRacing Tresrey USA |
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Aluminum
Offline
Posts: 832
Join Date: Jan 2009
|
11.24.2009, 01:17 AM
I went to castle website only found non warranty repair at $50 no $79? Where do I go to print the correct form?
Hobbywing ManiaRc Acorn racing UpgradeRc Blackbeard RC Team Hong Nor Team RC Monster MoosRacing BocaBearings SweepRacing Tresrey USA |
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
Old Skool
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
|
11.24.2009, 11:43 AM
Patrick said you need to include a note on the form to ask for an upgrade to the MMpro- its not an official thing yet, and you will join the end of the queue since MMpros are in short supply (specifically the FETs). Its $75(?) to upgrade to the MMPro, otherwise if the esc is less than 12months old and no rewiring has taken place on the esc itself, standard warrenty replacement/repair will be free (+ shipping).
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
