Slash 4x4 gets a ST makeover

So I wanted something a little different. I slammed the body by removing the rear body mount, and adding some posts in the holes in the shock tower. The front then got 1/4 in long cut down body posts. The body is a Crowd Pleazer from a Savage 25. I liked the body, but the bumpers were way to long. So I cut out the long extensions with the back bumper, and rescrewed it on to the cut off nubs. Seems very strong. For the front I cut off a big chunk, and mounted a RPM bumper from a Stampede. I used a pair of screws from the underneath into a couple nuts. The bumper rests inside the upper cushion bumper, so if it's hit hard enough it still works to absorb the blow, instead of transfering it all to the bottom skid.
I'm running a HV4.5 and a Xerun 80amp esc. Does very good for what I'm doing with it.

[Overdriven]

looks nice. how do you like the handling with the bigger tires and offset wheels?

how do you like the handling with the bigger tires and offset wheels?

IMO it made the truck. I was chassis slapping and rolling over bad with the stockers. These will pull wheelies, yet can still corner faster. I'm not really happy with these tires, so I have some Losi 320 Zombie's on the way. I hope they provide as much traction, while they are wider, so hopefully will add more stability.
Right now I'm geared 12/54, on 3s it's good for around 50mph.

[nitrostarter]

Nice approach here! And I like the thoughts here!! Watch Traxxas start making one next!

[MTguy]

Traxxas need to focus on getting there parts out..
Love the look of your slash. Nice to see something outside the box..

[magman]

Very nice...simple, yet effective

Well my next upgrades have been started to get ordered. It's a little more then just cosmetics, and will address all the weak parts :) Meanwhile I got some new rubber today. The losi Zombie 320s . They are a little wider, and shorter . Should give it a little more stability while blending more with the ST look.

[magman]

Are you going with pro-lines shocks or suspension kit?

I decided to build a diffeent one. This one will stay pretty much like it is. So here's what I have coming so far. It's gonna warrant a build thread once I start. ;) http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT x2 Here's a little mock up.

[Kcaz25]

WOW!!! I like what you did there in the picture just above! I'm going to see if I can do something just like this with my true track on my Emaxx. I'm going to eliminate the top arm and put a beefy turnbuckle in instead.

Got it painted up today. With the Zombie Max 30 series tires. I just need a "Can't brush this" sticker , in the middle of the hood.

More work on the Maxxslash.

[E-Revonut]

The RC-M member prototyping of Traxxas' answer to the Losi Ten-T

The RC-M member prototyping of Traxxas' answer to the Losi Ten-T

:D I think Traxxas needs more then me from RCM doing prototyping. They already paired with CC, how about letting Mike design a truck for them.

With the Maxx arms I'm not sure what class it would be in. It's gonna be the exact size as an E-maxx. I've been thinking of starting a build thread on it, but where does it go? It sure isn't a Corr truck anymore :D

[Overdriven]

No more worries about bending axles! Adds some width too, I like it!