FS: FLM All aluminu Maxx part out

Have some things left on my FLM All aluminum/Ti Neu Maxx...

Great condition FLM 3905 V1 chassis, Shock Towers and stock trans with single motor mount. I used a single TG servo and an alternate rx mounting set-up.






4 Traxxas 124mm 7075-T6 Toe links/ends in black aluminum for all four corners and 2 in the 112mm size I didn't use. Great condition.



Brand new Brushless REVO chassis (with doors and guards), arms and trans that were never used for a Slayer project




Like new FLM F/R Hybrid Bulks with 8 gear Ofna Spider diffs installed (same as UE). Ofna diff 50,000 front, 30,000 rear with Gorilla snot on gear ring. Shimmed meticulously with help from the UE guide and Lito (George16). Smooth and bulletproof.




8 Ofna Rear aluminum Buggy shocks that fit the e-maxx perfectly. Comes with the all important mounting stand-offs. Recently filled and sealed with Ofna 30/yellow springs Great condition - no bent shafts.



Aluminum maxx wheels like new, new Mashers very low wear



2 pairs (4 total) - brand new MIP CVDs for a emaxx 3905... never got around to putting them in




Also...

Proline Servo Saver and a Golden Horizon steering link. Like new. One of the arms is trimmed very slightly for rub clearance.

Ofna 17mm adapters (gun metal)

Golden Horizon (I think) 17mm blue adapters

Golden Horizon Silver Aluminum rx box, great condition, no marks


RPM emaxx 3905 axle carriers - black with oversized bearings and pillow-ball setscrews and caps. good condition