 |
|
|
|
|
|
 |
|
|
 |
Bent my motor mount |
 |
|
 |
|
(#1)
|
|
Guest
Posts: n/a
|
Bent my motor mount -
09.27.2010, 05:25 PM
sent it in to Mike last week to get a replacement....tried straightening it but didn't have much luck and didn't want to mess it up more
Not sure if he's gotten it yet but I haven't gotten an email or anything Don't know what caused it but it might of been lawndarting the truggy from like 8ftup and 25ft out  I've been going crazy not being able to drive it  
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
09.27.2010, 05:45 PM
Where did you send it? He moved recently. They are strong but not unbreakable. Iirc it was 50% off vs free on damage but could be wrong.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
Guest
Posts: n/a
|
09.27.2010, 05:50 PM
I e-mailed him before I sent it and he gave me the address
Yeah he told me it's 50% off a new one |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
Guest
Posts: n/a
|
09.29.2010, 10:10 PM
anybody on here ever talk to Mike?
ask him if he's gotten it yet lol |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
Guest
Posts: n/a
|
09.30.2010, 04:08 PM
just sent mike an e-mail asking if they've gotten it, I'm pretty certain it's had enough time to get there (shipped last monday)
I'm going crazy not being able to drive my truck..... |
|
|
|
|
|
|
|
You too... |
|
|
|
|
|
(#6)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 372
Join Date: Dec 2007
|
You too... -
10.09.2010, 06:28 PM
The same thing happened to me. I hit a curb not going very fat but noticed after clean up the mesh was off.
CF Ofna DM-1 Pro CC1717 CF Sportswerks Mayhem ST CF Losi LST2 |
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 372
Join Date: Dec 2007
|
10.10.2010, 10:53 PM
Never thought to return mines...just took out a some 2" aluminum angle 1/4" inch think and made one myself. Worked like a gem.
CF Ofna DM-1 Pro CC1717 CF Sportswerks Mayhem ST CF Losi LST2 |
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
UE Supermaxx Addict!
Offline
Posts: 1,006
Join Date: Feb 2009
Location: Gadsden, Alabama
|
10.11.2010, 12:02 AM
Mike is awesome, service and parts warranty/replacement are awesome as well.
I did this to a Revo motor-mount...but Mike was awesome and replaced it!  
› PM ME IF YOU HAVE THE BELOW: › VBS, CVDs, GM Single-Speed, OTB, Ultramaxxed, Super6, Strobe, Sprong, CNR Brake, UE Hex, DUH Towers, Predator, Blackbird, GA Blue Screws, HCR F/R Skids & Mutant |
 |
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 372
Join Date: Dec 2007
|
10.11.2010, 01:10 AM
Dayum...one word. HOW?
CF Ofna DM-1 Pro CC1717 CF Sportswerks Mayhem ST CF Losi LST2 |
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
UE Supermaxx Addict!
Offline
Posts: 1,006
Join Date: Feb 2009
Location: Gadsden, Alabama
|
10.11.2010, 07:03 AM
The pinion was set back as far on the shaft as it would go, but it turned out not to be enough...due to the 1-1.5mm of rotor-float, the rotor floated out enough to let the pinion get into the aluminum part of the slipper and literally torqued the motor forward and sideways, taking the motor-mount with it, as well as taking out the spur-gear.
A new, shorter pinion solved the issue after Mike replaced the motor-mount. Word to the wise...Novak pinions are crap, stick with Mike's Pinions or Robinson's pinions if Mike is out of stock. › PM ME IF YOU HAVE THE BELOW: › VBS, CVDs, GM Single-Speed, OTB, Ultramaxxed, Super6, Strobe, Sprong, CNR Brake, UE Hex, DUH Towers, Predator, Blackbird, GA Blue Screws, HCR F/R Skids & Mutant |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
