My Warrior 9219 is smoking! - RC-Monster Forums

MadDog · 02:17 AM

Yesterday I was driving my emaxx around and no problems. I brang it instead and tried to spin the tires are adjusting my spear gear (fixing the gear mesh)... the motor didn’t want to really turn over... it just seemed to rock back and forth unless I gave it full throttle. After about 30 seconds of trying to figure out what was going on the controller started to smoke! I let it sit for about 30min and tested it again... seemed to work fine. Then today it didn’t the same thing, it just "rocked" back and forth then smoked! I took off the shrunk wrap to take a look and turned it back on.. smoke started to come from the 4 block resisters (I think that’s what they are).... is this common??? Anything I can do to get this fixed?? Im broke as hell and I wanted to race my emaxx!

BTW, im running 14 cells of GP 3800 matched with external UBEC. Also all this was bought here from rc-monster last summer.

Edit, i just remembered its a 9918, not 9220.

Nick · 05.28.2006, 06:53 AM

Make sure none of the contacts are touching. Like the legs for the capacitors.

I'm starting to get concerned about how many BKs are smoking lately. :(

Sneeck · 05.28.2006, 07:02 AM

Your not the only one Nick, i've noticed the same thing. It's not looking good.

coolhandcountry · 05.28.2006, 07:07 AM

the best thing would to send it back to mike. It shouldn't be smoking at all.

Sylvester · 05.28.2006, 09:03 AM

This is not good at all, for BK that is, i dont see a great future for them!

BrianG · 05.28.2006, 02:56 PM

Wow, the more I read about BK's going bad, the more I'm glad I chose a model (12020) with a current capability far beyond what I needed...

Serum · 05.28.2006, 03:55 PM

Sylvester.. what is this for complete pointless and useless post?

you don't even know what is going on with this one.

I read more about them going bad lately, that's a fact, but is still have got no wall of shame for them, i didn't heard about a bad service issue? Ifotherwise; please share.

Everybody who is in the BL scene knows that his controller CAN go bad some time.. No matter what brand you are using.

@MadDog; Did you disabled the internal BEC on the 9918 by removing the jumper?

Nick · 05.28.2006, 05:57 PM

Quote:

Originally Posted by Serum

Sylvester.. what is this for complete pointless and useless post?

you don't even know what is going on with this one.

I read more about them going bad lately, that's a fact, but is still have got no wall of shame for them, i didn't heard about a bad service issue? Ifotherwise; please share.

I thought their service was poor, not bad... but poor. I was directed to the US Importer, BK didn't want to discuss it with me (maybe they only speak German?). It looked to me that I would have to wait upto 5 weeks for it to be repaired in which I would have to pay for delivery both ways and duty, in the end, it was cheaper for me to buy a new one off Mike. :024:

I love their value for money though, I'm not too bothered paying another $250 for a new one.

MetalMan · 05.29.2006, 12:23 PM

Quote:

Originally Posted by Serum

I read more about them going bad lately, that's a fact, but is still have got no wall of shame for them, i didn't heard about a bad service issue? Ifotherwise; please share.

Mine took 6 months, and they still charged $75. My first time around, it took 4 months, and they charged either $75 or $85. That was within about 3 months of buying it too!

When MGM took 6 months, they waived the service fee.

MadDog · 05.28.2006, 04:06 PM

The controller is not touching any part of the chassis or grounding out anywhere... i have made sure of that. I am also using Dean plugs.

I am using a external UBEC with the jumper removed from the Warrior.

Also the controller stinks like a badly burnt chip board... that cant be good.

MadDog · 05.28.2006, 04:09 PM

Oh ya, this is my second Warrior 9119. I had one last year but it just stopped working... no power or sound... i sent it to Mike and he sent me a new one. I would do the same for this one but i dont think it would be that easy since that was over a year ago now.

Serum · 05.28.2006, 04:15 PM

Just shoot Mike an email.

I'm sure he will do his best to help you.

MadDog · 05.28.2006, 05:31 PM

I sent him an email last night, still no response. Im guessing he takes time off on the weekends.

squeeforever · 05.28.2006, 06:02 PM

I found there service great. I fried one and they replaced it for free. Only thing it cost me was $3.85 for shipping....It did however take a few weeks.

Nick · 05.28.2006, 06:13 PM

Quote:

Originally Posted by squeeforever

I found there service great. I fried one and they replaced it for free. Only thing it cost me was $3.85 for shipping....It did however take a few weeks.

It cost you $4 to send it to Germany... from America?