Feigao brushless pede

[sleepy23]

Quick gearing question. I relocated my feigao 6s and mgm over to the new pede i bought. my question would be what could i safely gear that sucker to get the best performance?
Thanks

[sleepy23]

so no one knows anything about a brushless pede??

[SpEEdyBL]

This motor can only be geared according to the quality of your packs. If you have better packs, use a bigger pinion. Otherwise you will get poor performance with high gearing if your packs aren't up to par. Don't worry about heat. Basically it will heat up a certain amount no matter what gearing is used and no more than that until you gear really really high. Peak efficiency happens at above 100 amps.

[sleepy23]

anyone know of a better motor that wold run on the mgm80 and run great in a pede.

[squeeforever]

I would go for a Neu or Lehner 1920

[coolhandcountry]

You could get a mamba maxx 5700 motor. Try it out on the mgm.

[swiftneed]

the novak ss5800,is it as fast as the mamba i know the novak is smooth but do u also need a ubec I would like to take out my novak and replace it with something faster but longer runtime 7 cells

[squeeforever]

No, with a Novak you don't use a UBEC. I would go for a Mamba controller for sure.

[sleepy23]

humm, i will give it some consideration. I am not looking for blistering speed ( i have several other trucks for that). I am looking to keep it around 40mph which is where i am now, but may some more torque to keep the big meats moving.

[neweuser]

I would go with the neu and mamba combo in the pede. It would be nice to have someone try the mamba set up in one though! LOL

[coolhandcountry]

The neu motors are fatter than a 540. I not sure if you can fit them every where you would a 540.

[sleepy23]

the pede is sporting a custom tranny case and motor plate, fitting a new motor is not a problem.