RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Opinions please?
Old
  (#1)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
Opinions please? - 10.29.2006, 02:41 PM

Ok guys, as some of you know, I am in the slow process of rebuilding my E-Revo. V3.0 will have the batteries on the right side with the motor on the left, were the stock nitro motor went. It will use a Revo 3.3 tranny with a center diff and rear brake kit so I can tune the brake bias as well as not be so hard on the speedo and keep the 2 speed. What I can't figure out is the battery situation...Its either 4S or 5S with a Mamba Max esc and a Neu 1512 or 1515. 1512 only because of weight, etc. because this is gonna be a all out racer. What are your opinions? I am not really concerned with running the MM on 5S by the way....
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#2)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
10.29.2006, 02:56 PM

Sounds like a good project. Personally, I'd go with the 5s and the motor to go with it. For a given speed, you'd get more runtime with a higher turn motor with higher voltage. Of course, if you use hi-cap cells, like 8Ah-12Ah, the runtime point is academic. Just my $0.02.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#3)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
10.29.2006, 03:15 PM

Yea, I plan on going with 8000mah packs, maybe 12000 or 16000mah....I dunno about that yet, but what motor would you choose? A 1512, or 1515? I was kinda thinking about 4S just for the weight/size factor but...I'm not sure....
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#4)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
10.29.2006, 08:16 PM

Quote:
Originally Posted by squeeforever
Yea, I plan on going with 8000mah packs, maybe 12000 or 16000mah....I dunno about that yet, but what motor would you choose? A 1512, or 1515? I was kinda thinking about 4S just for the weight/size factor but...I'm not sure....
Yeah, runtime shouldn't be a problem then. :dft008:

I think a 1512 will work, but I'd go with a 1515 for the extra torque of the bigger motor. That's just me though - I tend to overengineer stuff...
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#5)
MetalMan
RC-Monster Mod
 
MetalMan's Avatar
 
Offline
Posts: 5,297
Join Date: Mar 2005
Location: SoCal
10.29.2006, 08:29 PM

Quote:
Originally Posted by squeeforever
Yea, I plan on going with 8000mah packs, maybe 12000 or 16000mah....I dunno about that yet, but what motor would you choose? A 1512, or 1515? I was kinda thinking about 4S just for the weight/size factor but...I'm not sure....
With a single battery on the right side, I would think that anything over 8000mah would be too tall and heavy.


SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz
   
Reply With Quote
Old
  (#6)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
10.29.2006, 08:42 PM

Quote:
Originally Posted by MetalMan
With a single battery on the right side, I would think that anything over 8000mah would be too tall and heavy.
Thats why I was thinking of 4S2P 8000mah instead of 5S. My 3S2P pack looks right at home in there. It can be a decent bit taller without problems...I was also thinking of going with 2 packs so I can run them in something else.
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#7)
sjcrss
Hyper 7 Erevo Center Diff
 
sjcrss's Avatar
 
Offline
Posts: 1,195
Join Date: Dec 2005
Location: CNY (Syracuse/Binghampton area)
10.29.2006, 05:10 PM

wow..that is some really high mah lipo's....got a link to them...would like to check them out


Bl E-REVO
Quark 125b
Castle Creations-Neu 2200kv motor
((2s2p)(4s)
7800mah 7.4v Lipo Pack
E-Revo 1/8 scale Hyper 7 CD
http://www.rc-monster.com/forum/show...1&goto=newpost
  Send a message via MSN to sjcrss  
Reply With Quote
Old
  (#8)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
10.29.2006, 05:15 PM

Well the 12000mah would be 4000mah TrueRC cells, and the 16000mah would be the 8000mah cells would be from TrueRC as well, but there one of the major namebrand cells. I just can't remember who makes em...It use to say on there website. Here is a link to the 8000mah cells. The MAJOR disadvantage with them is the width...

Last edited by squeeforever; 10.29.2006 at 05:16 PM.
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#9)
sjcrss
Hyper 7 Erevo Center Diff
 
sjcrss's Avatar
 
Offline
Posts: 1,195
Join Date: Dec 2005
Location: CNY (Syracuse/Binghampton area)
10.29.2006, 05:18 PM

cool, thanks...squee


Bl E-REVO
Quark 125b
Castle Creations-Neu 2200kv motor
((2s2p)(4s)
7800mah 7.4v Lipo Pack
E-Revo 1/8 scale Hyper 7 CD
http://www.rc-monster.com/forum/show...1&goto=newpost
  Send a message via MSN to sjcrss  
Reply With Quote
Old
  (#10)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
10.29.2006, 05:24 PM

No problemo...
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#11)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
10.29.2006, 05:24 PM

are you really gonna try 5 Cells with it.... I have a feelin' it will fry...


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!
   
Reply With Quote
Old
  (#12)
Finnster
KillaHurtz
 
Finnster's Avatar
 
Offline
Posts: 2,958
Join Date: Apr 2006
Location: Bucks Co, PA
10.29.2006, 08:32 PM

Quote:
Originally Posted by aqwut
are you really gonna try 5 Cells with it.... I have a feelin' it will fry...

I've ran 16 cells w/ mine, no probs. My 5s lipo from TrueRC should be here Mon or Tues, so I'll LYK as soon as I run it. I'm really not worried about it. :)
   
Reply With Quote
Old
  (#13)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
10.29.2006, 05:27 PM

Chances are I will try it...A rep form CC told one of our members its ok...http://www.rc-monster.com/forum/showthread.php?t=4417

Last edited by squeeforever; 10.29.2006 at 05:29 PM.
  Send a message via AIM to squeeforever  
Reply With Quote
Old
  (#14)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
10.29.2006, 05:40 PM

really?... wooah...mine's comin' in this week....


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!
   
Reply With Quote
Old
  (#15)
squeeforever
RC-Monster Mod
 
squeeforever's Avatar
 
Offline
Posts: 6,254
Join Date: May 2005
Location: Baton Rouge
10.29.2006, 08:28 PM

Me to...I will probably go with the 1515. That and the Mamba should be a nice setup. I just don't know if I should go for 4S or 5S...
  Send a message via AIM to squeeforever  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com