im stoopid... - RC-Monster Forums

revopqrs · **im stoopid... -** 01.02.2007, 11:39 PM

so i know nothing about the big brushless motors... ive owned 1/18th brushless stuff, but it was much easier to understand what i needed.
ive looked throught this forum and read plenty.. but damn dude!! reading "you need a 9956 to hook up the 4452 which will make the 3351 too hot!"
what the hell? i cant understand what anyone is talking about!! lol..

i want to go brushless on my emaxx, but this is a toy... im serious about buggys these days. the maxx is for intermission fun!:005:

right now its stock, ive decided on the flm chassis(was gonna go g2 but i dont like the batts so low for a basher), probably the hybrid diffs cases, and flm towers. im going to upgrade the drivetrain with revo stuff, i have tons of that crap still!
aside from that im only gonna fix what breaks..
i do have some 7 cell packs, so im lookin for a low cost bashing quality brushless set up. im not racing or trying to impress with brand names really...
i see several here that look good, but im not sure which to use? i have no idea what im lookin for.

could someone hook a brotha up with links to what i should buy? any other things i might need to keep it in one peice is welcome too.

again... this is not my primary rc, far from it. i want to make it as fast and as cheap as possible.

thanks!:eek:

linky, linky!!:027:

GorillaMaxx360 · 01.03.2007, 12:29 AM

Quote:

Originally Posted by revopqrs

right now its stock, ive decided on the flm chassis(was gonna go g2 but i dont like the batts so low for a basher), probably the hybrid diffs cases, and flm towers. im going to upgrade the drivetrain with revo stuff, i have tons of
linky, linky!!:027:

Hey man i am using the same setup but i went with the gmaxx chassis because it was too cool to pas up. As for a system go with the mamba maxx and 7xl 540cand a ubec. This will give you the most bang for the buck you get a good motor and fast and a good castle ecs. IT is all on the site mike does have a sale going on now and that may fit you needs.

revopqrs · 01.03.2007, 12:40 AM

hmmm... so this controller?
http://www.rc-monster.com/proddetail..._MM_ESC&cat=20

and this motor?
http://www.rc-monster.com/proddetail...540C_XL&cat=20

this B.E.C.?
http://www.rc-monster.com/proddetail.php?prod=6vubec

i really like the gmaxx chassis... but i cant get over the batts hanging out of the bottom of the lid!
if i go flat pan chassis, i might as well turn it into a truggy with a center diff... i dont wanna go in that deep! lol..:002:

thanks man.:027:

GorillaMaxx360 · 01.03.2007, 12:48 AM

i really like the gmaxx chassis... but i cant get over the batts hanging out of the bottom of the lid!

thanks man.:027:[/QUOTE]

Then just lower the body. LOL i am just kiding i know what you mean but the links seem to be right.

revopqrs · 01.03.2007, 01:06 AM

lol... ya gotta love when they attach numbers for names of things.. who came up with that idea anyways? its like what they say about computer geeks... they intentionally use a technical language that normal people cant understand!! it makes them feel smarter i guess?

why isnt anything labled "compatable with emaxx"? i dont have a clue how many amps to be lookin for, and the 7xl, and 9xl... what tha?
does it fit a freakin emaxx, thats all we need to know!!
are their really that many other big electric mts that people put brushless motors in? what is there 2 or 3 trucks total in production?
they could make it much easier if they labled the stuff "1/10- 1/8 mt"
thats all im sayin....:eek:

so if you can lower the lid enough to cover the sides of the packs how come noone does?:024: i always see the packs hanging out....

GorillaMaxx360 · 01.03.2007, 01:54 AM

Quote:

Originally Posted by revopqrs

l

so if you can lower the lid enough to cover the sides of the packs how come noone does?:024: i always see the packs hanging out....

I dont know man it would seem better for the aero dynamics and it would look cooler i know that is what i am doning on my maxx. The rule is the body must be flush with the bottom of the chassis.

BrianG · 01.03.2007, 12:42 AM

Quote:

Originally Posted by revopqrs

...ive looked throught this forum and read plenty.. but damn dude!! reading "you need a 9956 to hook up the 4452 which will make the 3351 too hot!"
what the hell? i cant understand what anyone is talking about!! lol..

ROFL! That's about the funniest damn thing I've read in a loooong time!! :D :D

Smilie faces cannot convey the laughs I got out of that! :wipes tears from eyes:

It's a whole different language. :)

GorillaMaxx360 · 01.03.2007, 01:53 AM

i hear you BUT for some they want to know all that jazz about the amps cell watage, and such. sometimes i even need to know this stuff

sjcrss · 01.03.2007, 09:29 AM

I would have to agree with jhautz....about the warrior 9920, it is very simular to the micro 2095 im running in my gmaxx....... they both accept upto 20 cells, while the warrior is rated for 4 more amps than mine is, and I have no problem running a feigo 7xl on it.....especially on 14 cells, which will be upgraded to lipo by the end of the month..... so that is my recomendation......

revopqrs · 10:39 AM

awsome guys, i appreciate it!!:027: i look forward to seeing my emaxx brushless! ill post some vid when its done!:030:

do i need such a gnarly BEC? $37 seems kinda high? or is that a good one?

do i only need one idler? ive never even opened the tranny on my max...

sjcrss · 10:51 AM

I have used a simular one like this, and have never had any problems, just remember to pull the little jumper plug, so your servo's will run on 6v...instead of 5v

http://cgi.ebay.com/3A-5V-6V-Switch-...QQcmdZViewItem

jhautz · 01.03.2007, 10:54 AM

http://www.helidirect.com/product_in...oducts_id=1158
I can personally say excellent things about this UBEC. It small, Light and it just plain works. What more can you ask.

As far as the idlers... You probably only need one. Once you switch to brushless, you will just to lock it in 2nd gear anyway. You won't use first gear, its not necessary with the torque of the brushless system. If you want to use both first and 2nd gear get 2 idlers. But I would just ditch the shifting servo, lock into 2nd gear and repalce the 2nd gear idler.

Procharged5.0 · 01.03.2007, 11:17 AM

Quote:

Originally Posted by revopqrs

ive looked throught this forum and read plenty.. but damn dude!! reading "you need a 9956 to hook up the 4452 which will make the 3351 too hot!"
what the hell? i cant understand what anyone is talking about!! lol..
brushless set up. im not racing or trying to impress with brand names really...
i see several here that look good, but im not sure which to use? i have no idea what im lookin for.

linky, linky!!:027:

I felt much the same when I first joined. I've learned alot since then!

There is a wealth of knowledge here and you'll be well taken care of!

Welcome to the RC-M forums!

revopqrs · 01.03.2007, 12:02 PM

thanks for all the help guys... im placing an order right now for the chassis, idler, bec, and a few other small goodies.
ill be ordering the brushless stuff in a week or so.
one more thing... im looking at the flm shock towers, but there is no pic.. i cant tell if the listed price is for one or two? it doesnt say in the description.:035:
i appreciate it, you guys really helped!:028:

http://www.rc-monster.com/proddetail...LM19000&cat=47

revopqrs · 01.03.2007, 12:17 PM

ohh man... that website? i put together my order, then when i went to check out it made me register and i lost my shopping cart? no big deal.. ill make a new one, well now one of the items i wanted says its "temporarily out of stock" because its in my other lost shopping cart!! arrgggh!!:mad:1
now i have to wait an hour for it to show back up in the store...