mamba max brushed

[jollyjumper]

will this work:
mamba max esc
4s 3200 orion lipo
brushed 550 size motor edit: its a 12 turn.:D
do i need ubec?
thanks.:D

[t-maxxracer32]

i wish i could help but i just realized how many :D you have in your post and sig lol wouldnt a regular brushed motor get pretty hott when using lipos? i would think so because even my mm 5700 gets pretty warm when using 7 cell batts.

[jollyjumper]

but its a brushed motor made for 14 volts tmaxx.

[Mike.L]

well it should work no problem....what motor is it?(dunno about the bec)

[jollyjumper]

trinity big block.

Originally Posted by jollyjumper

trinity big block.

Aren't those motors known to wear out in like 2 runs? I have heard that info from alot of people too...

Bye:018:

[jollyjumper]

dont know, but people tend to say that of a komodo dragon aswell and you can run it 10 times without cutting the comm.

[t-maxxracer32]

only 10 runs? why wouldnt you juyst stick with the bl motor...?

[jollyjumper]

i love doing some motor work, cant do it with BL. to bad.

[Serum]

You could get a purple fegao, and polish it till it's silver.. That's some work too.. :p

Just get a brushless motor, no matter what you do with a brushed, brushless will outpreform it in terms of efficiency and most likely torque..

With 4S you need am external BEC (or a loose battery)

[GriffinRU]

Originally Posted by Serum

You could get a purple fegao, and polish it till it's silver.. That's some work too.. :p

Just get a brushless motor, no matter what you do with a brushed, brushless will outpreform it in terms of efficiency and most likely torque..

With 4S you need am external BEC (or a loose battery)

I will be carefull with torque...

Artur

P.S Recently got plettenberg 355 for testing...

[jollyjumper]

for me, its like mamba max is an on or off motor. so far it does seem like that.

[coolhandcountry]

I would say you need a ubec cause it is 4s lipo.
No matter the motor.
I have read that some of the crawler guys really like the brakes of the mamba
max esc. They say they work real well.

[jollyjumper]

i actually like the handling of brushed better.
have 2 mm's and they dont drive as good as brushed motors.
i hope i dont get flamed for saying this:002:

[Serum]

What brushless motors have you got as reference then?