LSP-R - Finished, well, somewhat. - RC-Monster Forums

Sylvester · **LSP-R - Finished, well, somewhat. -** 02.17.2007, 04:53 PM

Hey guys, i finally had some time to progress on this thing! It is RTR and it is a bundle of power! I dont like how the esc is positioned, but it will do. The battery compartment is solid, and i will do a little more work on it to take off some excess weight, such as on the aluminum hold up peice for the top little "smiley face" as i call it. No more blabblering, time for pics! :)

Sylvester · 02.17.2007, 04:55 PM

Here are some more ; lookin' sexy:028:

Id just like to thank all the members at these forums for all your comments and help with this build. Most of all big props to Mike! Youre service is top notch! This truck will have some RCM stickers as soon as i can get my hands on some!

jollyjumper · 02.17.2007, 04:56 PM

nice work, keep it up.
did you test it yet?

Sylvester · 02.17.2007, 04:57 PM

In my basement, brakes are amazing, as for accel, well, my hardwood floor is probably crying right now.. ;)

nieles · 02.17.2007, 04:57 PM

very nice

i like your battery mount

jollyjumper · 02.17.2007, 04:59 PM

whats your system specs, i see a bk and probly a lehner but wich are they?
:p

Sylvester · 02.17.2007, 05:00 PM

Quote:

Originally Posted by jollyjumper

whats your system specs, i see a bk and probly a lehner but wich are they?
:p

9920/UBEC on a 1950 7T hi-amp, single 4s2p 8000mah maxamps lipo pack. She isnt too heavy, either! She is a bit under 10lbs, for me, thats an accomplishment!

jollyjumper · 02.17.2007, 05:02 PM

how many KV is the 1950/7 hi-amp?
thanks.

Sylvester · 02.17.2007, 04:59 PM

Thanks nieles.. 4 hours of pure labor.. lol

Sylvester · 02.17.2007, 05:03 PM

1867.. there is no difference in kv with the hi-amp/non hi-amp. (just so you know)

jollyjumper · 02.17.2007, 05:04 PM

oh i see, i didnt know it was the same.
i tought i read somewhere that they are different Kv.

Sylvester · 02.17.2007, 05:06 PM

Nope, they are the same! What i love about the lehner/bk combo is that there is close to zero cogging.. Even at low throttle i can drive with no problems, after it passes around 1mph, its rolling!

jollyjumper · 02.17.2007, 05:08 PM

do you have any other 1/8th BL systems?

nieles · 05:16 PM

Quote:

Originally Posted by Sylvester

What i love about the lehner/bk combo is that there is close to zero cogging.. Even at low throttle i can drive with no problems, after it passes around 1mph, its rolling!

i have a 12020 and a Quark 125 on a g2r revo with a 1950 8t
with the quark there is really no cogging even if i hold the truck with my foot the wheels just spin but zero cogging. with the bk there is a little bit of cogging

did you made that battery holder from a solid block?

Sylvester · 02.17.2007, 05:09 PM

Nope, only other r/c i have is a FT B4 with a MM5700 on 2s2p 8000mah lipo.