Xray Buggy 1/8 Electrify

[lolo]

FIRST OF
PARDON BY MY ENGLISH

hello: I want “to electrify” a buggy 1/8 (HOBAO hyper7, Or XRAY) and have doubts. I have 2 lipos of MAXAMPS 7.4v 6000mah 20C.In the future ....... BUY me of 11.1v, if I like the invention.
that motor I put to him 7.4V? That it walks, to toser a little to him to those of gas. and that does not spend a fortune to me. at the outset RUNS with 7.4V.
FEIGAO 540C 8XL
FEIGAO 540C 9L OR
FEIGAO 540C 7X

As or some +? to give to me to opinions q I of this not, not to LEAD a disappointment soon to me.

CLEAR and WHO allow me to put 11.1v without changing to him of variador. MAMBA MAX (this fixed one) or I am mistaken? . and that so mamba with the 2 lipos of 7.4v? the BURN OUT? a greeting thanks and a greeting.

[Dafni]

Get the 7XL or 8XL if you want 4S, and the 9XL for 5S Lipo.
Don't take the 9L for the buggy. And yes, do the Xray!!

The MM on 4S should be fine.

[supralover72]

Watch out for the X-ray. I didn't do one because it doesn't take the kyosho spurs. You'll have to mod them to fit the smaller diff cup as you have to run a plastic one.

[jollyjumper]

supra, mike can machine an adaptor for the ofna 51T spur or he can make an entire delrin spur.

[lolo]

this?




http://www.rc-monster.com/proddetail.php?prod=ofn30110

[jollyjumper]

yes lolo, mike can make an adaptor for that spur gear.
if you want a smaller spur then 51T he can make that aswell.
just send him an e-mail.

[lolo]

Jolly thanks. I am hoping that they command to me in buggy that I have bought of second hand and I already watch what I need.

[Serum]

You would also need a UBEC with the mambamaxx controller.

[lolo]

Hello:
Serum thanks. I have order in my local store. put, in which pondre arrives him to me a package type nitro. I am preparing the large stone bench of motor.y the lodgings for the lipos. a question that cable of mamba takes off to avaible the BEc? thanks pardon for my English

[lolo]

http://www.rc-monster.com/forum/showthread.php?t=6591