 |
|
|
|
|
|
 |
|
|
 |
Bl Crt.5 |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 114
Join Date: Sep 2007
Location: Sweden/Stockholm/Märsta
|
Bl Crt.5 -
09.26.2007, 02:25 PM
Hi, boys..finaly i will convert my Nitro to El, not cuz im tired of Nitro, just to race 4wd INdoor :)
The Motormount should come next week :)..but i still woundering a few things I will use a GTB frm Novak, and a 5.5 - 7.5 sintred motor, and 12-13T pinions that ive ordred. Now, the batteries...i have a LOT of 3600-3700 and matched 4200 packs here, but il use them normaly for my 2/4wd comp buggys..So i was planning on Lipos have been using LiPos for a while and i am familiar with them, but the LHS have a LOT of Lipos on sale, so the 3600mah 2s 20-30c isperfect for my wallet...can they handle ? or do i need higher Mah to reach higher Amps BUrst and Const? |
 |
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
09.26.2007, 02:50 PM
Check on EBAY - I can send you the link later but 4s 5000 20c were $125...
Can't go wrong |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
|
Im not dark, Im over ripened! xD
Offline
Posts: 5,607
Join Date: Sep 2007
Location: Westampton NJ
|
09.26.2007, 07:11 PM
Quote:
 
R/c Monster Team Driver Jq the car, LST, Sportweks turmoil pro Unconventional Techniques, Superior Results |
|
   |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
09.26.2007, 04:59 PM
I use Maxamps 2s 5Ah packs on a MM 4600 system and they work fine. I get around 30-35 minutes of runtime so that equates to 8.57A average draw and around 50A burst current. I don't know how the GTB system compares to the MM system so it's hard to say if you'll get the same results.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Titanium
Offline
Posts: 1,150
Join Date: Jan 2005
Location: wolcott ct
|
09.26.2007, 08:44 PM
I would go with a 5.5 or 6.5. I had a novak 7.5 with a lrp sphere comp and it didn't have enough power. also I think you are going to want to gear higher.
currently I run a peak 6.5 with a 16t pinion on a gtb ss. Hyper 9e, mmp,tekin 1900kv Associated sc10 4x4, novak 4.5 |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
BMW M Power!
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
|
09.26.2007, 09:41 PM
The Novak systems certainly do run differently from the Mamba Max's.
The Mamba Max's will probably have stronger peaks, but will probably end up drawing less power up top and such. The Novak's won't pull as many spikes down low, but since they generally have a lot of power even up high in the RPM range, they tend to suck up a lot of juice to create that top end power. CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM |
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 114
Join Date: Sep 2007
Location: Sweden/Stockholm/Märsta
|
09.27.2007, 02:18 AM
OK...Hmmm, hard do choose.
I can find a HV 4.5r for 280d´s A GTB ESC for around 100-150... MM setup ESC and a Motor,ex 5700 for around 180-200... maybe i should get the MM ESC, and find another motor??, maybe a HV 4.5r.? what would you guys picked up? remeber this is only for indoor "racing" @ a pretty small,tight track... |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
