Just recieve my Hyperion 0610i

Impatiant to open the box (any factory seal on it), i find a piece of paper how say:
==USER MANUAL ADVISORY==

Thank you for purchasing this Hyperion EOS Charger. We hope that it will exceed your performance expectations and give years of good servic for you.

We are sorry that we were unable to include a printed manual with this first production run of the new EOS0610i-NET, due to production time constraints.
But Hyperion has createa comprehensive Online User Support Center...........................as manual and guides will be updated ragularly.

Please visit this link online for full information:
[url]http://media.hyperion.hk/dn/eos.com

Thank you again for your suppost!!

The Hyperion team.



I'am the only one to have this surprise??

It's the first time i bought a charger without any manual.

But Hyperion seam to have a great Online support tough

[Arct1k]

That is a suprise...

http://www.hyperion-eu.com/public/ma...dc)-MAN-EN.pdf

I doubt it is any different from this and only 7 pages to print....

[jhautz]

The photo copier must have been on the fritz that day.

The manual listed for the 610i is somewhat different - all button "mapping " is in another document.

Mine had the same note as yours David.

The 1st 610i I received was not fully assembled - the rhs plastic endcap or piece was not on the charger when I opened the box. The screws were not in with it either.

I sent it back and had to wait almost another 2 weeks before the replacement showed up. All e RC said they had never seen one like that, partially assembled. My luck....

Originally Posted by jhautz

The photo copier must have been on the fritz that day.

Or the boss and a secretary was sit on it for......

[johnrobholmes]

They didn't get the manuals printed up in time. Still don't come with manuals in the box, so maybe they have figured out that online instructions are cheaper.

The 0610i is a killer charger, although a lot more cumbersome to scroll and navigate through as compared to 5i and 0606i versions.

Just try this charger,,Woww! it's very userfriendly

[lincpimp]

Originally Posted by david lamontagn

Woww! it's very userfriendly

Much like the secretary on the copier?

I got one not to long ago and thought it was odd there was no manual...

But i just saved the two PDF files from there site to my laptop and view them on screen when i need too....

I find it very intuitive to use it is an awesome charger!!

[MTBikerTim]

Not this secretary I hope. http://www.youtube.com/watch?v=VCM2DC2k8Cw

[Patrick]

Originally Posted by MTBikerTim

Not this secretary I hope. http://www.youtube.com/watch?v=VCM2DC2k8Cw

good one.
It could be this secretary as well http://www.youtube.com/watch?v=8tBsm...eature=related

I would much rather have a manual with the charger instead of having to look on the computer. I don't have a pc in the garage where my charger is, and I don't have a laptop to take to the track.

Do you have a printer with your PC

[Patrick]

Originally Posted by david lamontagn

Do you have a printer with your PC

Not one that's working. Plus a printed one's not the same as having the proper manual

[rootar]

i ordered my 606i (only charges up to 6 amps) from CBP.com the day they were released i got it and also got that paper, i would think maybe by now they would have manuals in there, but you never know yours could ahve been sitting on the shelf ever since these came out. Once you get the hang of running through the screens you really began to like it even more.

I've try my hyperion 0610i today for the first time.
Could you tell me if it's normal, but during charging, somes times the curent fall to "zero" for somes seconds, and then return to 5 Amps.
This did it lot of time during charging process.
Have you ever check it during you charge a batterie on your Hyperion 0610i???