Help me pick a new truck

[nl12]

I need a new truck I want to be able to fit 2 lipo packs on each side of the chassis, room for a big neu motor, mechanical brakes, and a 1/8th drivetrain. I can't seem to find a suitable truck, I want to be able to put 2 3s packs in it or a high voltage setup in it with 2 6s packs. A BPP truggy is close to what I need but I cant find one avalable, I may get a Mr. Constructor MBX5T conversion, but I would have to add mechanical brakes and make a lot of custom bits. I dont think a G3R could handle the power, I dont think there are strong drive shafts avalable for it, what do you guys think. I am sure there is something out there I am missing.
Thanks

[tallyram]

i know a g3r could handle a 6s setup! i had a g2r running a lehner 1950/8 on 6s with stock diffs! only problems i ever had were snapping the roll pin on the input shaft(easily fixed with allen key) and a stock bearing blowing out in the rear diff. the truck would hit 50mph consistantly with moderate gearing! i would recommend this setup to anyone.

[zeropointbug]

I've still got that FLM maxx roller chassis NL12..... if you are interested?

[squeeforever]

Yea, good luck finding a BPP truck. I don't think I would EVER sell mine.

[ssspconcepts]

Originally Posted by nl12

I need a new truck I want to be able to fit 2 lipo packs on each side of the chassis, room for a big neu motor, mechanical brakes, and a 1/8th drivetrain. I can't seem to find a suitable truck, I want to be able to put 2 3s packs in it or a high voltage setup in it with 2 6s packs. A BPP truggy is close to what I need but I cant find one avalable, I may get a Mr. Constructor MBX5T conversion, but I would have to add mechanical brakes and make a lot of custom bits. I dont think a G3R could handle the power, I dont think there are strong drive shafts avalable for it, what do you guys think. I am sure there is something out there I am missing.
Thanks

I am thinking about trying the Ofna Jammin CRT...supposedly you can use two packs on that chassis.

[nl12]

I already have a jammin crt!

[ssspconcepts]

Originally Posted by nl12

I already have a jammin crt!

What else do you have? How do you like the CRT in comparison to your other RC vehicles?

I am torn...trying to decide between building another monster truck (probably a Jammin CRT) or a 1/8 scale brushless conversion on a street car (probably Ultra GTP).

Anybody know what mount fits the Ultra GTP?

[nl12]

I love the CRT I have had it since March 2006, been brushless since I got it. I had a emaxx the Crt is my only RC at the moment. The Ofna CR mount probably fits the Ultra GTP, I also use it in my CRT because it puts the motor much lower than the CRT mount.

lsp's have quite a bit of space.

[Thunderbruiser]

i too had a g3r with 6s setup...ran it with a 9xl

[cart213]

A Monster GT should work if you replace the bulky 2-speed transmission with a center diff. Then it would have enough room on both side of the chassis for battery packs.

[cart213]

nl12, nice XTerra, btw! I've got one, too, but it doesn't look that cool!

[nl12]

Is not my xterra, just what I would like mine to be.