 |
|
|
|
|
|
 |
 |
solder motor directly to ESC? |
 |
|
 |
|
(#1)
|
|
RC-Monster Stock
Offline
Posts: 49
Join Date: Apr 2008
|
solder motor directly to ESC? -
04.19.2008, 01:24 PM
As the subject says. I got a used feigao motor from ebay and it has bullet connectors on it, but the local store doesn't have the big connectors that are on this thing, Can I just solder the esc wires into the bullet connectors? I can't remove the bullet connectors from the motor as they are attached right at the motor, there would be no wire left.
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 326
Join Date: Feb 2008
Location: Levittown, NY
|
04.19.2008, 03:05 PM
That would be ok.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
04.19.2008, 03:41 PM
Yes DO NOT CUT THEM OFF... Just desolder them...
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Stock
Offline
Posts: 49
Join Date: Apr 2008
|
04.19.2008, 09:45 PM
I could desolder them, but I will probably just solder right into the female bullets that are on the motor.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
Soldermaster Extraordinaire
Offline
Posts: 4,529
Join Date: Apr 2007
Location: Plymouth, MA, USA
|
04.20.2008, 01:33 AM
If you do that, you'll have to de-solder the connectors anyways should you decide to use them later.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
Guest
Posts: n/a
|
04.20.2008, 03:00 AM
You could but the correct size of connectors on line.......that would be my suggestion
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
