KD36 ? cheap(er) feigao ?

I did a quick search on RCM, but didn't find this mentioned anywhere....

http://www.hobbycity.com/hobbycity/s...idProduct=6678

Anyone seen it yet ?


J.

[junkman]

I was kind of curious about them as well. I put a post up on their message board, not a lot of help though. There was a bit of a write up on the turnigy 540 size inrunners not being to impressive, which has got me kind of leary about these as well, but thats about it.

[MTBikerTim]

Those are definitely cheap. I'd be tempted to try one if they had one around the 11xl kv.

[suicideneil]

Cheap & cheerful, or cheap & nasty?.... *dun dun dun*

Off to bed now, I expect answers in the morning! :whislte:

[Sammus]

Theres also the Turnigy B36 for ~$20 for an even cheaper option lol. And then people complain about their motor running so hot?

[jzemaxx]

They look to me to just be another Feg, just packaged with a different color can.

[MTBikerTim]

That's what I was thinking. the KV seems to be almost identical.

[lutach]

I have the 36-50-6S and to be honest, it's a beast. I thought it was 2900Kv, but when I ran it in my MBX5T, I noticed it was just sucking a lot of AMPs. Thant I found out it was a 5900Kv motor. First thing you have to do is to some how add screws or use high strength/temp epoxy to keep the front end from coming loose or you can use Mike's heat sink which will hold the motor together. You can see in the picture, the motor is more like 56mm long than 50mm stated my KD.

[jhautz]

I swear... Do you own every motor that costs under $100.

[lutach]

Originally Posted by jhautz

I swear... Do you own every motor that costs under $100.

A couple, but the ones that are over $100, I can't count them all .
Edit: I meant to say a few .