i got my v2 today, and it is dead

[mk351e]

i'll post more tomorrow (it's 3:39am), but i got my v2 in the mail, and it too died during calibration just like the 1st.

why did i sell my entire nitro collection again?

[yuri]

Oh man, sorry to hear that...

[tc3_racer_001]

o boy, castle aint gonna be happy!

[mxracer]

mamba max all the way !!

running 5s on a 1515 1y , with no mods or issues at all(just a 25mm fan) , temps are awesome (50C esc and 50-60 C motor), if the esc dies , they are cheap and plentiful to replace . unles you want to run 6S im sticking with the mamba max for now

( i have 2 MMM on order , but by the way the MM is going i probly wont require them )

sorry to hear of the lost , yet another MMM RIP

[TruckBasher]

Now I regret for selling my two MM..... I thought MMM V2 issue had been ironed out...

Sad to hear this...just hope CC will comment on this V2 failures....

[yuri]

I´m sure they will... Still glad to hear of those v2 MMM that are running fine, but wan´t to hear more about them, my v1 is running fine but I think I´m waiting for it to fail some day and this does not help to get rid of that fear...

[jhautz]

get it sent back to CC ASAP. The sooner they can see the problem the better. Hoping its just a fluke at this point but given the prior history....

The second dead v2 already? I'm canceling the two of mine right now.

[gramey]

Originally Posted by mk351e

i'll post more tomorrow (it's 3:39am), but i got my v2 in the mail, and it too died during calibration just like the 1st.

why did i sell my entire nitro collection again?

That sucks, especially having waited so long and taken so much flak on your shipping thread to actually receive it and get your hopes up only for it to fail is a bummer. Is it definetely dead, presumably all your connections etc. are o.k. and you've tried disconnecting everything and starting again?

sorry for dead V2 MMM....
Hope CC hurry up to solve dead V2 MMM soon

try with an external BEC or RX pack ? make sure you disconnect the red wire first ;).

J.

[mk351e]

I started the thread about well, you know what. ok, done. then I come home from work yesterday, and in the mail is a package for me. then I look at the address, IT'S FROM CC!!!!!

So I bolt in the house like a loser and open it up, excited as hell! Later that night, I bust out the soldering iron, and get busy. around 3 am my batteries are all charged, and it's time to connect and calibrate. but, same issue as last time: can't get this thing to calibrate w/ my spektrum. I even bumped the arming time all the way up to 5 seconds this time! So I try it over and over again, maybe 7 or 8 times, then, I hear what sounds like a popped fuse, and it's game over.

I've checked my connections MANY times, but there aren't many, and this isn't rocket science. I've tried to go back and get it to work, but it's dead as a doornail, just like last time. I'll call CC tomorrow to see what we can do, but the deadline for them will be 8/15. If I can't get a working MMM by then, and I really do want THAT, then it's off to mgm I go, to spend a lot of extra money on a controller that I hope will work. If not, then i guess I need to go back to nitro.

I can say with total certainty that this hurt even more the second time around. Perhaps someday I can get through the calibration process with the MMM.

did you have your radio set up before you tried to bind them?

i am wondering if the throttle end point on spektrum , which is 125% is messing up these MMM on start up, although i dont think everyone that had one fail during setup is using spektrum

[sleebus.jones]

If you popped two during calibration, I wonder if it's truly the MM at fault here? I know that doesn't make sense, but just saying.

Still on the gas and kicking a** with my V1.

Sleeb

[glassdoctor]

Originally Posted by mk351e

I started the thread about well, you know what. ok, done. then I come home from work yesterday, and in the mail is a package for me. then I look at the address, IT'S FROM CC!!!!!

So I bolt in the house like a loser and open it up, excited as hell! Later that night, I bust out the soldering iron, and get busy. around 3 am my batteries are all charged, and it's time to connect and calibrate. but, same issue as last time: can't get this thing to calibrate w/ my spektrum. I even bumped the arming time all the way up to 5 seconds this time! So I try it over and over again, maybe 7 or 8 times, then, I hear what sounds like a popped fuse, and it's game over.

I've checked my connections MANY times, but there aren't many, and this isn't rocket science. I've tried to go back and get it to work, but it's dead as a doornail, just like last time. I'll call CC tomorrow to see what we can do, but the deadline for them will be 8/15. If I can't get a working MMM by then, and I really do want THAT, then it's off to mgm I go, to spend a lot of extra money on a controller that I hope will work. If not, then i guess I need to go back to nitro.

I can say with total certainty that this hurt even more the second time around. Perhaps someday I can get through the calibration process with the MMM.

I'm wondering if you unplugged and replugged the battery a lot during this process?

I killed an LRP esc once because of a connector that was difficult to get plugged in. Once it took several trys to get it plugged in (caps charge and spark every time) and that's all it took to smoke it.

just a thought....

When exactly did this "pop" happen? When batts plugged in, switch turned on? During the calibration???