help

I can't afford an nue motor right now and my fiego 8xl just took an crap on me! Does anybody know anything about this Turnigy B36-56-06 1800kv from hobby city just looking to keep bashing for now! It's only 26 bucks!

[Arct1k]

You get what you pay for sorry - cheapest option is a Medua 2000 60mm but 2-3weeks wait

[TDC57]

you might want to try the Aveox 36/30/1.5 @ 1900 KV.

I got one off Ebay for $104 and I run 4s on it in my Truggy. it's a 4 pole motor and has been worth every penny so for

[Pdelcast]

Originally Posted by TDC57

you might want to try the Aveox 36/30/1.5 @ 1900 KV.

I got one off Ebay for $104 and I run 4s on it in my Truggy. it's a 4 pole motor and has been worth every penny so for

Pretty decent motor, but hard to find...

[kulangflow]

You can also try the 60-1600kV Medusa if you can run 5s through it. It runs very strong on 5s.

[lincpimp]

Originally Posted by Pdelcast

Pretty decent motor, but hard to find...

Since they quit selling the left overs on ebay I have not seen many... I have about 10 aveox motors, and they cost less than 3 neu motors...

Good value, but I can't wait for the cc neu motors!

[snowhack]

Hobby city has also gotten the KB36-74-09XL 1900kv back in stock now for less than 30 clams....has great reviews. The KB45-08XL 1700kv is gaining popularity from HC for under 60 bucks. Lots of buzz on the forums about it. A real honker at 45mm it has a 6mm shaft and insane power. The 09XL has a 5mm shaft but has the same mounting capability as your Fiego 25mm...the KB45 is a 29mm.

pinions for each can be found at www.kershawdesigns.com
5mm only at www.liquidrc.com and here too of course.