Building FLM Brushless Savage

[saydee1800]

I am converting my Savage so far I got my Savage X
Part on order :FLM Kit Castle Mamba Monster Feigao "XL" 10 Brushless Motor
15 t pinion 48 t robinson Spur futaba Fasst 2.4 Hitec Digital Hi Torque HS-5955TG Servo and I was going to use stock one for my manual brake.
I really like my brushless E-Revo and E-maxx as for as the brake and reverse
can I make my FLM Savage work the same as my E's with the speed control only

I was think about reverse and Yes or No?

My ? is what do I need to change

[plaviblue]

The stock reverse brakes very easy. Make sure you get a really good battery!!!

Nice setup you have going there, similar to mine.

What I did was lock the tranny into second gear, the BL motor has plenty of torque, and removed the oneway bearing. This way you can use your monster to run reverse and brake which is working great for me. The following link will show you what needs to be removed from the tranny and what needs locked, go to the bottom of the page,

http://mysite.verizon.net/vze1nu22/id1.html

Once this is done your reverse module, if you have one, comes out and so does you manual brake along with all supporting hardware, sure does clean things up.

Truck runs great with no issues at all. Oh ya, your FLM kit doesn't come with instructions so use this link for any help you may need,

http://www.fastlanemachine.com/Publi...3/Default.aspx

Hope this helps,

Darion

darion who made your battery trays?im lookin for trays like that.maybe u have some spares to sell?

Originally Posted by BADBOY2

darion who made your battery trays?im lookin for trays like that.maybe u have some spares to sell?

BADBOY2,

That page that I linked wasn't mine so I am sorry I can't help you with the trays. I looked all through that link and couldn't find an email or person to credit. Sorry about the confusion.

Good luck finding what you are looking for,

Darion

no problem..i hope flm will fab something like that too..