i want your guys input on this

i just bought a t3 for extemely cheap, and im gonna run stock truck at my local track so for a budget setup i am thinking this

http://www.hobbycity.com/hobbycity/s...h_showCart.asp

what you all think? im gonna run it on 2s of course maybe 3s occasinally

[js058515]

Originally Posted by big greg

i just bought a t3 for extemely cheap, and im gonna run stock truck at my local track so for a budget setup i am thinking this

http://www.hobbycity.com/hobbycity/s...h_showCart.asp

what you all think? im gonna run it on 2s of course maybe 3s occasinally

Bad link! It's not showing anything when you click on it.

http://www.hobbycity.com/hobbycity/s...idProduct=7188

http://www.hobbycity.com/hobbycity/s...idProduct=7187

http://www.hobbycity.com/hobbycity/s...idProduct=4943

http://www.hobbycity.com/hobbycity/s...idProduct=7651

[crazyjr]

Everything looks good except for the motor, for most stock class racing you will need a 2 pole slot designed motor, in other words a novak/LRP/GM/orion or any of the many variants. Personally, I wouldn't mind if the kv were matched, but some people are bad on keeping with the "spirit" of stock

[Finnster]

I got a ton of spare t3 parts btw. I had one a while ago and broke the chassis tabs and never fixed it and eventually went to 1/8th scale. Going to ebay it, but never getting around to it.

LMK if you are interested.

[Metallover]

I would personally get a sidewinder or mamba max. I don't know much about the ez runs, but the cc products are solid.

thanks guys, i am wondering about the motor also, but everyone is not all super serious so they shouldnt care, and finnster pm me with what ya got as i want to stock up

[Finnster]

Originally Posted by big greg

thanks guys, i am wondering about the motor also, but everyone is not all super serious so they shouldnt care, and finnster pm me with what ya got as i want to stock up

OK, gimme a little bit to look thru it. I basically know I have nearly a full car minus chassis, but I'll double check stuff and get back to you.

[t-mange]

Maybe you would want to try this motor?

http://www.hobbycity.com/hobbycity/s...idProduct=8477