What should I do?

[BL_RV0]

Ok guys, i have some things, and wondering what you would do with them:
I have a hyper st pro with medusa 70-1600, MMM and 6s neuenergy 4900 lipo. Also have a vxl rustler with a SPC 3s 5000 lipo. I have a nomadio react with 1 rx and a spek dx2 with 1 rx. Also have a align 600xl with neu windings, 2 3s 2800 lipos, bk 9920 and to charge i use a eos1210i with a lba10. That's what i have, what would YOU do?!

[What's_nitro?]

Do you want to switch around the components? Are you selling them? I don't understand.

You should send them all to me. I'll take care of them for you.

[BL_RV0]

I'm not selling, well, i would if the right price was offered, but i was just wondering... if you had what i had, what would you do?

[What's_nitro?]

Well, you have two complete vehicles there. Unless you plan on buying another to put some stuff in, perhaps you should think about selling off some of it. The 9920 can't run the 600xl due to the ridiculously small RPM limit on the 9920. Your two 3s packs would be a good combo for the 600xl IF you had another MMM, or could stand to swap it from car to car.

[Metallover]

I say you send me that 9920 so I can borrow it. You already have a mmm... I need an esc for my 8ight.

[BL_RV0]

Yeah, I was trying to fit my 600xl into my rustler tonight, but it is too fat to fit in the narrow hole... I was thinking... pick up a zippy 4s pack and run that in rustler with the 9920 in the rustler with the vxl motor

[JERRY2KONE]

Originally Posted by BL_RV0

Yeah, I was trying to fit my 600xl into my rustler tonight, but it is too fat to fit in the narrow hole... I was thinking... pick up a zippy 4s pack and run that in rustler with the 9920 in the rustler with the vxl motor

If you can squeese a 427ci hemi into a Volkswagon bug, you can squeeze that motor in there. There are many creative ways to make a square peg fit into a round hole, if you just think outside of the box.

[What's_nitro?]

Originally Posted by BL_RV0

I was thinking... pick up a zippy 4s pack and run that in rustler with the 9920 in the rustler with the vxl motor

Wont work. BK's have a 42K RPM limit with 2-pole motors. I learned the hard way. See, like I said- "ridiculously small RPM limit".

[Metallover]

Iirc the 600xl is a 6 pole...

I'd like to add I was serious about the 9920.

[What's_nitro?]

I'd like to add that the 600xl will fit if you have the FLM tranny case, or if you cut out the back of the TRX tranny case.

[Arct1k]

The 9920 ONLY runs on 2 pole motors - If you don't need it I'll take it back :) My quark went crispy...

[BL_RV0]

Well that sucks about the BK. I'll try to pick up another ESC then, or maybe stick with the VXL esc. Has anyone run a vxl esc on 4s?

[whitrzac]

Originally Posted by What's_nitro?

I'd like to add that the 600xl will fit if you have the FLM tranny case, or if you cut out the back of the TRX tranny case.

you can never have too much power

[Arct1k]

Well if you don't need it I'll take it back. thx

[BL_RV0]

Ok, I can ship it tomorrow if you PM me your address.