Rootar's crt.5 - RC-Monster Forums

rootar · **Rootar's crt.5 -** 03.13.2009, 12:19 AM

Got my crt.5 in the mail today from evan, so i figured id post some pictures of the setup, Ill be running a feagio 9l i just built from parts of other 9Ls (can and windings from one, endbells from another, rotor from a 10L, brand new bearings and new leads i made all the way from inside the can out to the 4mm plugs). so itll be the
-rcm mount
-part of rcm tray
-9L w/ rcm clamp
-MM w/ccbec
-Flightpower 3s 3200 30c lipo
-spectrum rx
-airtronics 94360 all aluminum servo with gear upgrade
-traxxas old school dishes
-Panther komodo soft truck tires
-proline body it came with for now
-later a Jconcepts illuzion body

ill finish making my esc and rx tray/ center diff brace tomorrow. itll step donw on either side of the center diff so theyll be mounted lower...

btw these .5s are smaller than i thought...

lincpimp · 03.13.2009, 12:50 AM

Looks good Ross, that lipo sure does look familiar!!!

rootar · 03.13.2009, 07:45 AM

yea it fits in there nicely.

rootar · 03.13.2009, 04:55 PM

just some pics of my mounts i finished today.

rootar · 03.13.2009, 05:00 PM

more pics with motor and some electronics... i gotta pick up some velcro so i can finish it.

magman · 03.13.2009, 05:00 PM

The crt.5 is small...of course you could always stretch it even more like I did....

bruce750i · 03.13.2009, 05:37 PM

That little CRT.5 makes that RX look huge in the first pic in post#5.

magman · 03.13.2009, 05:40 PM

Quote:

Originally Posted by rootar

just some pics of my mounts i finished today.

Nice job on your mounts!

rootar · 03.13.2009, 08:37 PM

i actually got the crt.5 instead of another ls10 because it was smaller... ill race it with the 1/10th 4wd buggies for chits and giggles but i got it to play.... i wonder how its gonna like 35 foot doubles and 20 foot stepups???

they are a good base for project trucks also....

magman · 03.13.2009, 09:42 PM

I have actually launched mine off of a 20' high pile of sand and landed square on the chassis w/ no broken parts!

rootar · 03.15.2009, 10:37 AM

yay im finished! haha i gotta glue the tires now and take it for a spin. but here is the finished product with the correct servo and all. it turned out very balanced and i got the lipo right up againist the spur, well onto the chassis. I think the wiring turned out nice too.

rootar · 03.15.2009, 10:49 AM

more pics. you can see i have alot of clearance between the body and electronics (unlike other style conversion where the esc and rx is mount on a flat plate atop the CD) which will give me a good feeling when this little dude takes a hard one to the roof that my electronics wont get hit....

magman · 03.15.2009, 11:51 AM

Well done! On my 2 crt.5 there is so much room for the esc it is nice for a change. On my mbx-5 it is a tight fit.

Nice clean set up

No dye on the wheels?

Jeremy1976 · 03.15.2009, 11:57 AM

Looks real nice!

rootar · 03.15.2009, 12:39 PM

nah no dye on the wheels for me, i love the old school dishes they are actaully "dished" in instead of the new style dish wheels that are almost flat faced... plus you can find these traxxas dishes for cheap cheap nowdays i think two packs of these cost me $4... and they are tough wheels.

its raining and wet outside (has been for the last 5 days) so i cant drive it out side but i had fun drifting around our big tile living room for about 15 minutes and still had over half a pack left. (dog was going nuts trying to attack it) so hopefully the weather will clear up like its supposed to tuesday or wednesday and ill get it out on my track and see how good it really is...

whats everyone running in the diffs and shocks, i dunno whats in the truck but the shocks dont feel bad at all, maybe a tad soft but nothing like what everyone makes it out to be to need an upgrade, this may have soming to do with me running a small battery, ill weigh it tomorrow and let yall know but i can tell ya its pretty light.....