ordered my medusa 36 50 3300kv

Yeah, I too just ordered the Medusa 36-50-3300kvV2. I am going to use my Mamba Max ESC, just not sure on gearing. I am going to start out with my buddys' 2S lipo. Also not sure whether or not to start with the stock wheels and tires or upgrade to 2.2 truck rims and tires. Trying to keep my temps low on my motor and ESC. Any advice?

[stum]

Well Im using 14t on a 4800kv 50mm medusa and it's pretty perfect, so I would imagine you'll be wanting something more like 16 or 17t on 2s lipo. I can run non-stop w/o heat issues... though I did thermal the MM one time after 2 straight packs racing.. but a fan fixed that right quick :) the ofna 1/12 wheels (sells as a 4pk) is great and cheap (dish) and snag the losi x-3000's buggy tires as they really rock.... enjoy!

Well guys my question is what to do about the holes on the can of the motor. I dont want dirt and stuff getting in there.

[stum]

I actually cut a peice of duct tape to a 36mm circle and then use a hole punch for the shaft and stick it right on the end bell.. works great. On the front if you have any exposure, you'll want to cover it up as well iMO.

[Arct1k]

High temp alum tape - pm your address and will send you some...

Hey Artic, can I get in on some of that aluminum tape action also. BTW, I got my RC-Monster extended chassis in and it is exactly as great as many have said on this forum. Kudos to Mike.