Does E-revo chassis fit A123 cells?

[zeropointbug]

Ricky!

[timaneli]

yes. i mean 13.2v at 4600mah.
is more then enough for small or regular tracks.
i run this cells with my hobbywing combo with 2350kv motor geared for 40mph.
is more then enough to smoke nitros if you know what i mean!!
i don´t think for a e-revo is needed more voltage and power then that, maybe more run time for packs!!
i run the car in this setup for 3 months with sucess without any thing break!!
the cells fit the compartments perfectly in size and is 4 cells for each pack wired in paralel and connect in series.

[zeropointbug]

mah... 4s2p would be okay i guess, considering it's 2300kv motor (how big BTW?)

I have had my Revo since fall of 2007 I haven't broke anything either... except for suspension arm, my fault.

My Revo running 7s1p and 7s2p packs running 1512 Neu(1700kv) has plenty of power (~1300watts) and agility with the 1p pack... the 7s2p has noticeably more power(2500watts...theoretical) and punch but I don't like the feel of it compared to the 1p pack... too heavy and not as agile.

[zeropointbug]

Well I made an 8s A123 pack and it doesn't work with the Quark... I plug it in and turn the switch, it makes an alarm beeping sound (obviously for over-voltage protection)

Well, I think I am going to get either some flightpower EON X30's, or the ThunderPower 40C packs... I am thinking more towards the TP packs however just because of the best voltage holding ability. I am sure they are both good choices.

I just need the E-revo chassis now...