larger hub carriers for emaxx

[maximum]

I haven't had a problem on the few runs i've had with my new emaxx exept for the right front wheel nut coming off ( luckily i was going slow and was able to find it ) but was wondering if what i heard was correct about the bearings being undersized and if it would cause a serious enough problem to buy larger carriers? thanks.:C:

The reason the nut is coming off is because the axle that it is screwed on spins and the nut can slip and un-screw itself out, it has nothing to do with the bearing or hub carriers. Use some blue loctite and that should fix the problem.

[crazyjr]

I had the same problem with the right rear on my revo and blue locktite fixed it