Lincpimp is the man! - RC-Monster Forums

**Lincpimp is the man! -** 06.11.2009, 06:32 PM

Yes you heard right,lincpimp is the man!Cool guy to deal,i bought a lipo
battery form him a few weeks ago.Bummer it got lost in the mail ,dam post
office

.Then i sent him a few pm's and and we talked.This guy went
out of his way to find out what happen to the battery pack,even thought
he works his butt off to build battery's for guy's here on the forum.Plus his
other job , i think he works for sesame street

Plus he stayed in the
hospital with his buddy over night,NICE GUY! AND he still had time to deal
with me .hope i was not a pain in the butt Linc even with all that was going
on.This guy is great to deal with and i will deal with him again!

P.S With all the battery's that he fixes and builds,he should build his
own brand of battery;s and call them LINCPIMP LIPO"S!What do you guy's
Think!

lincpimp · 06.11.2009, 06:34 PM

Thanks for the kind words. I kinda feel bad, as this is the first issue I have had with USPS misplacing one of my packages. I did wait a few days before I made another pack for dirtdiver as well, just in case the PO found it. I guess it is gone, but hopefully it shows up and you have a matched pair!

nitrostarter · 06.11.2009, 07:05 PM

Maybe it will blow up in transit somewheres.... Then it will get traced back to linc... Uh ooo....

lutach · 06.11.2009, 08:55 PM

Quote:

Originally Posted by nitrostarter

Maybe it will blow up in transit somewheres.... Then it will get traced back to linc... Uh ooo....

That would be USPS' fault

. They could learn a lesson too and make a better tracking system.

blueb8llz · 06.11.2009, 11:49 PM

yups he sure is! he gives great deals and he does go outta his way to help a member out.
i call him "RC Mastermind" haha

FG101C · 06.12.2009, 01:09 AM

Linc definitly is the man, took care of a LiPo for me and it's better than from the factory.

Metallover · 06.12.2009, 01:36 AM

Linc, the guy at maxamps claims their lipo tabs are welded together. How do you get them apart? Besides just being the man?

snellemin · 06.12.2009, 01:38 AM

Yes, he's the man. Bought a few motors from him and they were all in good condition. He's all over the web and beats me to some good deals on motors.

lincpimp · 06.12.2009, 01:41 AM

Quote:

Originally Posted by Metallover

Linc, the guy at maxamps claims their lipo tabs are welded together. How do you get them apart? Besides just being the man?

They are crimp/welded. Not really welded, but maybe crimped and some heat applied, kind of like resistance welding, no extra material introduced to complete the weld.

Hard to explain, but say you just have 2 cells, open them up so that the cells will lay flat and the tabs are in the middle, firmly grasp the tabs as they come out of the cell on both cells with both hands (one thumb and forefinger on each tab) and pull them apart. You may have to wiggle them a bit, but the little "welds" will pop easily. You may have to go back and forth between the 2 sets of tabs so that you do not tear one set while you are working on the other. Hope that makes sense...

Metallover · 06.12.2009, 01:43 AM

Quote:

Originally Posted by snellemin

Yes, he's the man. Bought a few motors from him and they were all in good condition. He's all over the web and beats me to some good deals on motors.

You know why he's all over the web?

06.12.2009, 01:44 AM

lutach: they did upgrade it check it out
james: i sent you the wrong # the other day, but it showed you got it today, let me know what ya find out? thanks man

Metallover · 06.12.2009, 01:45 AM

Quote:

Originally Posted by lincpimp

They are crimp/welded. Not really welded, but maybe crimped and some heat applied, kind of like resistance welding, no extra material introduced to complete the weld.

Hard to explain, but say you just have 2 cells, open them up so that the cells will lay flat and the tabs are in the middle, firmly grasp the tabs as they come out of the cell on both cells with both hands (one thumb and forefinger on each tab) and pull them apart. You may have to wiggle them a bit, but the little "welds" will pop easily. You may have to go back and forth between the 2 sets of tabs so that you do not tear one set while you are working on the other. Hope that makes sense...

makes lots of sense to me. That one guy said it was impossible... You're really the man!!

06.12.2009, 01:59 AM

or...photo shop is fun

kulangflow · 06.12.2009, 10:52 AM

Quote:

Originally Posted by Metallover

You know why he's all over the web?

I'm in the process of re-doing my desk right now, but I'm not quite where that guy is.

Back on topic, Linc is a great guy to deal with. He gives great deals and is a quick shipper!

nitrostarter · 06.16.2009, 11:51 PM

LINC: clear your PM's