 |
|
|
|
|
|
 |
 |
Am I doing something wrong??? |
 |
|
 |
|
(#1)
|
|
satansbackyard666
Offline
Posts: 164
Join Date: Apr 2008
Location: Hong Kong
|
Am I doing something wrong??? -
07.27.2009, 11:56 PM
guys, pls take alook and tell me what i did wrong, THX!!!
mine is Xray XT8 Truggy/ MGM16018/Tekno Neu 1515 1y/F/2 packs of GP4300mAh 35C Lipo/ALL STOCK GEARS Differential Ratio: 4.3 Transmission Ratio: 3.42857142857 Other Ratio: 1 Spur Tooth Count: 48 Pinion Tooth Count: 14 Total Voltage: 14.8 Motor KV: 2200 Tire Diameter (inches): 5.5 Tire Ballooning (inches): 0 Motor Current Draw: 0 Motor coil Ω: 0.006 Spur/Pinion Ratio: 3.43 : 1 Total Ratio: 50.54694 : 1 Tire Circumference (inches): 17.28 inches (438.88 mm) Total Motor Speed: 32560 RPM Vehicle Speed: 10.54 mph (16.93 km/h) Effective KV Value: 2200 KT constant: 0.61 oz-in/A Motor Torque: Amperage not specified... Final Torque: Amperage not specified... Final Power: Amperage not specified... |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Check out my huge box!
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
|
07.27.2009, 11:59 PM
Change the tranny ratio to 1.
|
|
|
|
|
|
|
|
Am I still doing something wrong??? |
|
|
|
|
|
(#3)
|
|
satansbackyard666
Offline
Posts: 164
Join Date: Apr 2008
Location: Hong Kong
|
Am I still doing something wrong??? -
07.28.2009, 12:03 AM
hey lincpimp, am i still entering something wrong cause it's only 36.14mph or it's about the right speed???
Differential Ratio: 4.3 Transmission Ratio: 1 Other Ratio: 1 Spur Tooth Count: 48 Pinion Tooth Count: 14 Total Voltage: 14.8 Motor KV: 2200 Tire Diameter (inches): 5.5 Tire Ballooning (inches): 0 Motor Current Draw: 0 Motor coil Ω: 0.006 Spur/Pinion Ratio: 3.43 : 1 Total Ratio: 14.74286 : 1 Tire Circumference (inches): 17.28 inches (438.88 mm) Total Motor Speed: 32560 RPM Vehicle Speed: 36.14 mph (58.05 km/h) Effective KV Value: 2200 KT constant: 0.61 oz-in/A Motor Torque: Amperage not specified... Final Torque: Amperage not specified... Final Power: Amperage not specified... |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Brushless
Offline
Posts: 3,156
Join Date: Jul 2005
Location: Gramercy, LA
|
07.28.2009, 12:09 AM
Sounds about right. You're tire diameter might be a little small if you're running truggy tries.
|
 |
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Dual Brushless
Offline
Posts: 5,061
Join Date: Oct 2007
Location: Thousand Oaks CA
|
07.28.2009, 12:25 AM
Factour in some ballooning. Maybe .5-.75"
|
  |
|
|
|
|
|
shold be right, nitrostarter |
|
|
|
|
|
(#6)
|
|
satansbackyard666
Offline
Posts: 164
Join Date: Apr 2008
Location: Hong Kong
|
shold be right, nitrostarter -
07.28.2009, 12:27 AM
hi nitrostarter, my measurement should be right cause i just measure the diameter of the XT8 stock tire (about 5.75 inches), and the 5.5 inches tire is the HPI Phaltline...
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
