Flm 3906

got this in a trade for my kyosho rockforce crawler. all i changed are the CGR shell which i had on my crawler.
FastlaneMachine 1.5 inch stretch chassis-Black anno, RRP diffs with 3mm screws and aluminum cups, Pro-Line steering, Full RPM treatment, beefy ACNCM aluminum bulks, Gorillamaxx single speed with RCM idler, Supermaxx shocks.
MIP centers, RPM arms, rear truetrack, shock towers, body mounts, bulkhead braces front and rear skids. Maximizer beadlocks and Imex tires on traxxas 17mm hex adapters.
just installed EZRun 80A with feigao 7XL (2370kv) servo- hitec 7955TG. TX/RX is futaba 3PM 2.4ghz.
still waiting on 22T pinion and 4S 5000mah 30c to get it going.
i know it, pics





thanks to snoopmaxx for tech info 8)

[suicideneil]

Thats pretty sweet, nice look with the black chassis. Only thing I would do is dye the red RPM parts black top match the rear, and tidy up the wiring at the front.

Just keep a check on the esc and motor (especially the motor) temps, 7XL is a very hot motor, got to gear it just-so to keep it happy.

180*F max for the motor
160*F max for the esc
120*F max for the lipos.

Enjoy the truck, much more exciting than crawling

thanks bro, been really mulling gearing on this. gonna try out the 66/18 ive got now then check out how it goes on 66/22, resurrected my temp gun just for it.
as for the RPM front arms- ive gotten over the color. time to change, then id go order the black version. this will be a backyard basher with occasional romps at the beach if i dont forget to take it w/me.

[SnoopMaxx]

It looks great Joot