Mini E-revo 1/16 MM 5700kv Build/Review - Page 2 - RC-Monster Forums

emaxxnitro · 08.12.2009, 09:10 PM

Unsullied_Spy · 08.13.2009, 03:56 AM

Quote:

Originally Posted by emaxxnitro

I WANT TO SE THIS VIDEO!

Sir, I'm going to have to ask to see your permit for this weapon.

Dang, I can't think of a better way to keep the neighbor's cat (and kids) off my property

suicideneil · 08.13.2009, 06:34 AM

Quote:

Originally Posted by emaxxnitro

http://tenbol.com/

D'oh.

They dont sell much, but what they do sell is very nice indeed- I especially like the fact they offer a gearing/voltage/motor/esc setup examples.

shaunjohnson · 08.13.2009, 06:56 AM

holy omfgwtfbbq big ass power/weight ratio

:yip i:

_paralyzed_ · 08.13.2009, 10:02 AM

wait a minute.... thats the "practically new" esc from wyldyzf450 or whatever isn't it?

Metallover · 08.13.2009, 01:20 PM

I'm sure the esc is fine; just change the settings. It could also be your radio or your bec on the MM. Try a different radio and see if an external bec or rx pack soves your issue.

I think if it were settings, it would be start power or something along those lines.

crazyjr · 02:34 PM

I hope to get a Mrevo this year, probably beginning next year. I now see my basic XL1200 lehner and a 5s setup in one

Does anyone know the weights of both the lehner basic XL and the mambamax motors?

LiqrSicc · 08.16.2009, 08:31 PM

Quote:

Originally Posted by _paralyzed_

wait a minute.... thats the "practically new" esc from wyldyzf450 or whatever isn't it?

Yup that's the one. I sent it back to Castle to be replaced. It was cogging no matter which motor I put into it. I bought a new MM and no problems at all, confirmed the one I bought was faulty. Anyways that new MM went into my nephews mini so I'm waiting for the new one to come back from Castle and I'll get video then. I just sent it out yesterday so it may be around 2 weeks til I get to it.

LiqrSicc · 08.16.2009, 08:32 PM

Quote:

Originally Posted by Metallover

I'm sure the esc is fine; just change the settings. It could also be your radio or your bec on the MM. Try a different radio and see if an external bec or rx pack soves your issue.

I think if it were settings, it would be start power or something along those lines.

I tried the settings. Didnt work. There was something wrong with the ESC. It even made my Neu 1112 cog.

_paralyzed_ · 08.16.2009, 11:21 PM

Quote:

Originally Posted by LiqrSicc

Yup that's the one. I sent it back to Castle to be replaced. It was cogging no matter which motor I put into it. I bought a new MM and no problems at all, confirmed the one I bought was faulty. Anyways that new MM went into my nephews mini so I'm waiting for the new one to come back from Castle and I'll get video then. I just sent it out yesterday so it may be around 2 weeks til I get to it.

talk about salt in the wound. You're being cool and rolling with the punches. Keep up the good work.

LiqrSicc · 08.17.2009, 01:29 PM

Quote:

Originally Posted by _paralyzed_

talk about salt in the wound. You're being cool and rolling with the punches. Keep up the good work.

Thanks, I run the eBay department for the company I work for and am a Powerseller myself on my personal account so I learned how to just take the loss. Sometimes it's not worth it to even argue. Well, Castle has always done me right, hopefully it doesnt take a month like it says on the website.

jordan... · 08.19.2009, 04:30 AM

hey,

first off nice build!!! definately got my interest, dont know if thats a good thing or a bad thing

Just wondering if you could tell me if thered be room for a 75-80mm long motor with that tenbol mount, or would the chassis have to be modified?

cheers
jordan

LiqrSicc · 08.19.2009, 03:08 PM

Quote:

Originally Posted by jordan...

hey,

first off nice build!!! definately got my interest, dont know if thats a good thing or a bad thing

Just wondering if you could tell me if thered be room for a 75-80mm long motor with that tenbol mount, or would the chassis have to be modified?

cheers
jordan

Thanks! That might be overdoing it though. That's Neu 1515 size isnt it? The mount will clear the rear shock mount but you might have problems fitting the body on it.

A RC Dude · 06:01 PM

Quote:

Originally Posted by emaxxnitro

I WANT TO SE THIS VIDEO!

FREAK! Can anyone emagine how high you would have to gear that so it wouldn't just shred the tranny to bit every time you got near the throttle?????

NEW IDEA FOR YOU SPEED FREAKS!!! haha 6s in that geared to the moon could go faster than any tires could handle! that is as long as the tranny will let you get fast enough

jk that would be crazy! add a couple pounds to the front to keep it on the ground tho

oh yea, didn't we get a power chart on the MMM2200kv motor and see that it had 3.4 or 3.5hp on a 5s lipo? it was way back when they first came out or maybe a tad bit b4 they came out. if i remember that correct, that car would have a power to weight ratio of more than 1:1!

jordan... · 08.19.2009, 09:24 PM

Quote:

Originally Posted by LiqrSicc

Thanks! That might be overdoing it though. That's Neu 1515 size isnt it? The mount will clear the rear shock mount but you might have problems fitting the body on it.

ok cheers, yes definately overdoing it

the 1515 is 69mm long, i was thinking along the lines of a lmt 1950 hiamp