Dual Mamba Maxx 4600's in a E-Maxx?

[aqwut]

Single setup is much better IMO..... Havin' dual sounds cool, but you never know when/if the two motors/esc are fighting eachother.....

[Serum]

They are rotating into the same direction, so it's most likely they work together. It doesn't need an accurate timing when you use two motors and two controllers. It takes more care to use two motors on a single controller.

[neweuser]

Originally Posted by Serum

They are rotating into the same direction, so it's most likely they work together. It doesn't need an accurate timing when you use two motors and two controllers. It takes more care to use two motors on a single controller.

And this would be because each esc is reading A motor, not one esc trying to read two right?:032:

[Serum]

If you are using 1 esc and two motors, you need the rotors start at an identical time. The esc needs to see the two as one motor only.

[Dafni]

For as long as you run both combos on the same battery, you should be fine. (use two Lipo packs in parallel)

[neweuser]

Makes sense. Thanks