Quote:
Originally Posted by E-Revonut
I have no solid proof as I can't remember where I seen that Deans where rated for 60A and another place I seen that Traxxas plugs where rated at 100A. It does make sense as there is a much larger contact area with the traxxas plugs.
BTW none of that info came from the traxxas forum! LOL Never been a member there and have only visited the site when following links from here
|
Contact area is not much more than 1.5 times as much. As far as contact pressure goes, the traxxas plug just relies on the flex of the plastic, where the deans has a spring to hold it together. I do not run traxxas plugs, but I did have to install 47 of them for a buddy (he has 3 pedes and an emaxx, and he has a butt load of stick packs). I did notice that the build quality of the plastic varied widely. Some of them snapped together very tightly, and others were almost loose. Deans are better in that respect. i have had 1 deans fail, and that was used underwater, and the little spring piece coroded off. Some dielectric grease would have cured that issue.
Threaded Mode
