RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > HPI Savage

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#2)
gyn77
RC-Monster Carbon Fiber
 
Offline
Posts: 75
Join Date: Jan 2007
Location: Roma
05.30.2007, 04:16 AM

Hi Pullstarter,
I initially run my savage with 12 cell 4200 intellect and the kit I used was Novak HV 4.5 (750watt), but the absorption of this motor was to big for this batteries and they damaged soon.

You can see a video of my savage with Novak 4.5 (but 4s lipo) here:

http://www.adicesare.altervista.org/video/

IMHO, Better of novak kit (and less expensive too!), I think you could consider a Mamba Max (+ubec) with a feigao 10 or 11XL, but you will not run very very fast.
Otherwise, if you take lipo cells, you could use my equal setup:
mamba max + UBEC
feigao 9XL
lipo 4s maxamps
47t plastic spure gear
16t pinion gear

With this setup, my savage run at max velocity of about 52 km/h (radar gun releved) with good torque.

Don't use a steel spur, the plastic one is better! With a steel spur you can break the pinion ore the motor shaft. (I did it too!)

Sorry me for my bad english.
Alex.

Last edited by gyn77; 05.30.2007 at 04:20 AM.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com