MGM 22418 experiences

[Topas]

MGM Compro 22418-3 Car / Boat EXPERT+

My experiences so far :

This ESC rocks !
I had a numerous ESCs in the past (including Schulze and Kontronik, both from German manufacturers) for many rc-cars from 1:16 to 1:8. But this one is the best.

Let me explain :
For me it is very important that the controller keeps cool and the motor runs smooth without cogging .

Check your sensorless ESC if it manages to push a heavy car forward if it climbs on a steep hill and makes a short stop in the middle .... (the Kontronik Jazz 80 was not able to handle this situation)

With the usbcom+ you are able to change many parameters in just seconds - I recommend to use the auto tuning function to autodetect the best settings for your motor. I promise that you will find the correct values for acceleration and deceleration for your car!

Another important feature of the MGM Compro is to protect your lipos. (reduces RPM if the voltage drops under a specific value) [as I posted
before in another thread, this may cause trouble if your lipo is not able to deliver such a high current]
In my opinion the "low voltage cut off bug" mentioned here in the forum is a consequence of weak lipos !

Problems :
The peak current values displayed on the pc are not realistic .
Finding the right brake setting is difficult.


I have to say thanks to MGM Compro for the fast delivery and great support (they send me the 6mm MP-Jet connectors - which are able to
handle up to 300 A !!! FOR FREE - these plugs are amazing ! )