Quote:
Originally Posted by sleebus.jones
Sounds like the voltage is dropping enough to cause a controller reset. I'm thinking these 7XL setups are drawing a lot more current than anyone is giving them credit for, even though they seem to be setup within reason.
|
Hmm.....
When I ran my old turnigy esc I had this same controller cut off thing when I used my 7XL and 16T pinion. But with my KB45 8XL 1700kv with a 20T pinion it ran fine on 4s and 6s, but my KB45 is dead now due to can popping. I guess I will try lowering my gearing and or using two lipo packs in parallel to have a higher "C" raiting. Eventually I want to get a lower turn motor and run 6s lipo anyway.
Threaded Mode
