RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Revo

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#8)
VintageMA
RC-Monster Aluminum
 
VintageMA's Avatar
 
Offline
Posts: 660
Join Date: Sep 2006
Location: CT
06.29.2008, 12:36 PM

From a few trials with the E-Revo, don't gear for 40mph with the stock tires. My first gearing was 24/68 on a 1515 running at about 30,000rpm geared for 35mph - at 35 mph the stock tires balloon enough (about a full 2" in diameter)to make the speed closer to 50mph+ and will drop your overall ratio tremendously and you will get some serious heat (got up to 180* on a 1515 in 10 minutes - a 7XL would become a griddle)

I just switched out to a 1515 running at ~36,000rpm on 6S and geared it at 18/62 with the Badlands MT (again ~35mph) and it was running much smoother and motor temps around ~130*.

The badlands do not balloon much at all. The Talons are cookie cutters - if you gear for 40 you're going to balloon close to 55-60mph gearing with the tire expansion.

I would say to gear up to closer to 30-32mph and with a little tire ballooning you'll be around high 30's. When you get better tires you can then gear back down to a 20-22T pinion.


“Everyone has a right to be stupid; some people just abuse the privilege.”
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com