E- revo gearing questions

Originally Posted by crazyjr

that spur would be too small for anything Emaxx wise, you'd need a 28 to a 30 tooth pinion to get any mesh and the gearing would be too much for even the most powerful setups

This is a quote from Zinno from the traxxas forums:
http://monster.traxxas.com/showpost....00&postcount=4

"For 2x 550 setup, the info is in the manual. For single motor mount, the range is HUGE:

High CG motor position:
54T spur: 11 - 36T
56T spur: 9T - 34T
58T spur: <= 32T
62T spur: <= 28T
65T spur: <= 25T
68T spur: <= 22T

Low CG motor position (or alternate "big" motor mount):
54T spur: 12T - 29T
56T spur: 10T - 27T
58T spur: <= 25T
62T spur: <= 21T
65T spur: <= 18T
68T spur: <= 15T"